I see some of my pics are still up.
I get emails everyday from photophucket saying my account has been disabled and to give them money if I want to keep them.
Sorry if they go away but can't justify giving them money.
sam
Search found 912 matches
- Wed May 31, 2023 9:26 pm
- Forum: Aprés Ski Building
- Topic: Pictures currently unavailable
- Replies: 2
- Views: 5336
- Fri Dec 23, 2022 6:47 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Tip fill alignment issues
- Replies: 2
- Views: 2930
Re: Tip fill alignment issues
My cores and tip filler are wider than the finished ski.
I use a dab of hot glue to attach the 2 just outside of the ski.
It gets cut off with the flash.
sam
I use a dab of hot glue to attach the 2 just outside of the ski.
It gets cut off with the flash.
sam
- Tue Nov 29, 2022 12:20 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: White spots showing through base material.
- Replies: 12
- Views: 4509
Re: White spots showing through base material.
Looking at your pic, I think the answer is shown just above the p-tex. Looks like bubbly cured epoxy. Could be cavitation from your spreading technique? Wet out your maple and your base. Try not to whip up any bubbles. If you're using heat the air will expand and those bubbles have no where to go. J...
- Thu Jun 03, 2021 5:42 am
- Forum: Ski/Snowboard Design and Layup
- Topic: epoxy cure time
- Replies: 11
- Views: 4828
Re: epoxy cure time
I still use my old electric blanket folded to fit over the skis on my vacuum press.
I cover it with a yoga mat for insulation, gets pretty darn hot.
I bought it at goodwill type store for a couple bucks.
Your mileage might vary
https://www.amazon.com/electric-blankets/b?node=3732191
sam
I cover it with a yoga mat for insulation, gets pretty darn hot.
I bought it at goodwill type store for a couple bucks.
Your mileage might vary
https://www.amazon.com/electric-blankets/b?node=3732191
sam
- Tue Mar 30, 2021 2:56 pm
- Forum: Aprés Ski Building
- Topic: Video search: Ski construction/technology
- Replies: 1
- Views: 3750
Re: Video search: Ski construction/technology
30 second google search found this?
Shouldn't be hard to find contact info.
http://skibuilders.com/phpBB2/viewtopic.php?f=2&t=3173
sam
Shouldn't be hard to find contact info.
http://skibuilders.com/phpBB2/viewtopic.php?f=2&t=3173
sam
- Tue Mar 09, 2021 9:04 am
- Forum: Journals: Log Your Ski Building Progress
- Topic: First pair of skis!!
- Replies: 5
- Views: 4937
Re: First pair of skis!!
Sam I've had hairy bases before when using new belts (especially ceramic) on the grindrite. You can remove it with a hot wax and scrape. I use a single edged razor to scrape the wax off and most of the hairs come with it. It might take a few wax scrape cycles to get it all off. Let the wax cool hard...
- Sun Feb 28, 2021 9:16 am
- Forum: Ski/Snowboard Design and Layup
- Topic: 22 oz vs 19 oz vs added core thickness
- Replies: 4
- Views: 2583
Re: 22 oz vs 19 oz vs added core thickness
I know my 22oz and 19oz have the same material in the 45's just a lighter 0 in the 19. Torsional rigidity is pretty similar between the 2. The 19 makes a softer longitudinal flex with the same core, and the ski a bit lighter. Adding some carbon tow to the 19 adds longitudinal stiffness and still kee...
- Sun Feb 07, 2021 9:41 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: 3d Base questions
- Replies: 3
- Views: 2089
Re: 3d Base questions
Google site:skibuilders.com spoon
Should find a fair bit on 3d bases
sam
Should find a fair bit on 3d bases
sam
- Fri Feb 05, 2021 9:19 am
- Forum: Journals: Log Your Ski Building Progress
- Topic: cariboo skis
- Replies: 7
- Views: 5492
Re: cariboo skis
I'm at around 3000' elevation and have a very similar vac pump (old robinair). I pull around 24"hg even with a small leak thru the glue joints on my press frame. You will do better once you get some proper sealing tape and a decent film. I used 6mil vapour barrier for my first few builds with t...
- Thu Jan 28, 2021 9:31 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Monoski
- Replies: 8
- Views: 8350
Re: Monoski
Thanks mammuth, My buddy worked at and with Faction to design the first rockered mono. He has a few different boards but I think they are all fairly old designs. Will see if he's interested in something a little more modern. We all struggled with the idea of shaped skis when they came along, but onl...
- Wed Jan 27, 2021 10:46 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Monoski
- Replies: 8
- Views: 8350
Re: Monoski
Dug this old post up as a friend has asked me to build a mono to replace his old Faction. Spent a bit of time measuring the thing tonight. Sidecut is set way back, 37cm's from the ski center. Looks to be about 25m radius. Board dimensions at 190cm's 240-185-190. Core is around 8mm down to 2mm with a...
- Tue Jan 19, 2021 9:51 am
- Forum: Journals: Log Your Ski Building Progress
- Topic: Jonrezz’s Build Log
- Replies: 94
- Views: 45659
Re: Jonrezz’s Build Log
Use a J-roller to push the excess epoxy out. This will also help smooth out some of the transfer you're getting from your X's of carbon that show in your ski pic. You need to have somewhere to push that excess to. I've used breather along the sides or at the tip and tails and roller-ed all the exces...
- Sun Nov 29, 2020 2:26 pm
- Forum: Materials and Supplies
- Topic: Carbon Fiber Stringers - Never Summer Factory Video
- Replies: 5
- Views: 5436
Re: Carbon Fiber Stringers - Never Summer Factory Video
Catalog from Graphite Master. If you want to buy more than a few yards.
https://graphitemaster.com/wp-content/u ... gh-Res.pdf
Sam
https://graphitemaster.com/wp-content/u ... gh-Res.pdf
Sam
- Sun Nov 29, 2020 1:28 pm
- Forum: Materials and Supplies
- Topic: Carbon Fiber Stringers - Never Summer Factory Video
- Replies: 5
- Views: 5436
- Fri Nov 27, 2020 4:13 pm
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: mold and core profiler
- Replies: 4
- Views: 7164
Re: mold and core profiler
Thought I'd drop this here. Nice to see Photophuket put the pics back up. Still using this method, just made a new sled last week. Think I'm on my 4th set of trim boards now. I've used this method for cores and camber molds. Super adjustable and cheap. I've even reversed it to make reverse camber mo...