Nice one guys. Well heres our situation. We live in Birmingham in the UK, and from what you have heard about the weather over here it is actually about 28-30oC at the moment, and we are working in a lab at Uni that doesn't have any air-con. Its damn hot in there!!!!! The first 2 i cut out I cut with...

its definately the base warping during/after the cut. its not slipping during the cutting, but as soon as we lift off the template and check the base its warped.

Hey guys,

I've got a problem and I'm sure someone on here can help!!!

I've been cutting out the base by clamping a template and cutting around. But when the template is removed we are finding that the base is skewed and thus is useless!!! Any ideas??

Cheers lads

Ross

Hi, Me and a mate are starting to make skis in the UK. We are running a design project for school leavers at the University of Brimingham in July and once we have got the Uni to pay for the press we will be Skis for ourselves. Should have a set being used up at Milton Keynes by the end of June and a...

Hi guys, When you are designing the ski and the mould, how do you design the camber. The mid boot postion is normally set back from the middle of the ski, so do you offset the maximum hight of the arc (of the camber) to this point or do you keep it in the middle?? Hope this makes sence. Cheers guys ...

Hey guys,

Just trying to sort out the final design to our first pair of skis, was just wondering what radius you made your tips and the hight of the tips at the ends.

Cheers for any help

Ross