Search found 11 matches

by jonno
Thu Oct 19, 2017 10:36 pm
Forum: Materials and Supplies
Topic: Anyone with extra fire hose to sell in Europe ?
Replies: 0
Views: 4155

Anyone with extra fire hose to sell in Europe ?

Hi guys just looking for some fire hose and wondered if anyone had an extra to sell or had a supplier that had used here in Europe ?

Thanks in advance.
:)
by jonno
Thu Jun 23, 2016 5:59 am
Forum: Materials and Supplies
Topic: Miller studio european equivilent (sublimated topsheets)??
Replies: 0
Views: 3585

Miller studio european equivilent (sublimated topsheets)??

Hi Guys I have found a couple of companies is Europe who can do sublimation work but haven't been impressed. I had a couple of topsheets made by Miller studios and the work is flawless and beautiful, only the shipping is expensive. I wanted to know if anyone had found something similar in Europe? Th...
by jonno
Sat Nov 17, 2012 9:36 am
Forum: Ski/Snowboard Design and Layup
Topic: A question about sno-cad
Replies: 10
Views: 7957

Thanks for that Sammer.At least Im not crazy. its just a bit frustrating not being able to predict or specify where you want the narrow point relative to your skis lenth. Your right,I just need to learn to use something better. Its just such a simple programme to use. Makes life really easy except f...
by jonno
Fri Nov 16, 2012 2:19 pm
Forum: Ski/Snowboard Design and Layup
Topic: A question about sno-cad
Replies: 10
Views: 7957

Hey ULC. If you as an exercise creat a ski with rediculesly large tip and super narrow tail it makes it clear what is stressing me out. then the narrowest part of the ski is super far back towards the tail and the calculated waist width given is at the mid point of the running length. or am i wrong....
by jonno
Fri Nov 16, 2012 11:58 am
Forum: Ski/Snowboard Design and Layup
Topic: A question about sno-cad
Replies: 10
Views: 7957

A question about sno-cad

Hello all. Im looking for a bit of advice in using sno-cad X. When using the programme its easy enough to achieve the width you would like underfoot. But this is not the narrowest part of the ski and i would like to be able to predict where the narrowest part of the ski is so that i can predict or s...
by jonno
Tue May 25, 2010 2:03 am
Forum: Ski/Snowboard Design and Layup
Topic: where are you putting your boot centre line?
Replies: 6
Views: 4232

ok 55 percent of running length sounds good on a traditional ski and even a bit further (56percent in DR delams case for a powder ski) but what about the relationship to overall length of the ski ? My ski is 183 long with a running length of 130, which is short i know and a huge tip. so with the des...
by jonno
Mon May 24, 2010 1:32 pm
Forum: Ski/Snowboard Design and Layup
Topic: where are you putting your boot centre line?
Replies: 6
Views: 4232

thanks jono for that il give the 55 percent a try and check the previous forum discussions, sorry just being a bit lazy. cheers guys.
by jonno
Mon May 24, 2010 8:09 am
Forum: Ski/Snowboard Design and Layup
Topic: where are you putting your boot centre line?
Replies: 6
Views: 4232

where are you putting your boot centre line?

so my question is are people mounting there boot centre on the centre of the skis turn radius or are you using some other point like say matching the ball of the foot to the center of the turn radius. I came up with a ski mid winter and after mounting some rental binding on it and testing different ...
by jonno
Tue Mar 02, 2010 1:43 am
Forum: Materials and Supplies
Topic: prepping duraclear clear topsheets
Replies: 0
Views: 1641

prepping duraclear clear topsheets

Im finding it hard to get any info out of my supplier of my Duraclear topsheet material as to the correct way to clean before pressing. first pair i pressed i used acetone to clean it and although i havent had a delam problem as of yet i did lightly bump the side of the ski and got a mini delam on t...
by jonno
Sat Jan 23, 2010 4:34 am
Forum: Ski/Snowboard Design and Layup
Topic: Sag in the tip and tail-(not camber) to pre bend or not
Replies: 5
Views: 3108

Thanks boys thats great. Im using a simple vacuum set up with no heat and full wood, so not sure if that will make a huge difference but im just trying to minimise the time that is spent with prep, and prebending with hot water, which is what i have done before means more time to wait for things bef...
by jonno
Fri Jan 22, 2010 12:37 pm
Forum: Ski/Snowboard Design and Layup
Topic: Sag in the tip and tail-(not camber) to pre bend or not
Replies: 5
Views: 3108

Sag in the tip and tail-(not camber) to pre bend or not

OK boys and girls, this is my first post so forgive me if i screw something up. A lot has been written about camber and the loss thereof. But what of sag in the tip and tail of your skis. have they retained thier shape and hight and if so what process are you using.ie pre-bending or not? heated pneu...