Search found 450 matches
- Tue May 14, 2024 2:35 am
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: CNC for beginner
- Replies: 1
- Views: 53
Re: CNC for beginner
In fact you need to find a SW that fits you. I did try different CAM SW, some were at one point to easy/minimalistic (MeshCam) some way too powerful to use it only from time to time (cause i forgot half of the workflow). I like AutoCad for 2D drawings but didnt use it for 3D. So i have a complicated...
- Tue May 14, 2024 2:25 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Extra Biax in Tip Area for increased torsional stiffness?
- Replies: 3
- Views: 113
Re: Extra Biax in Tip Area for increased torsional stiffness?
War nicht eine der Ideen hinter Cap Skis mit 3D Top das du gerade solche Dinge kreativ beeinflussen kannst? Geht natürlich nur bei Vacuum pressen.
- Thu May 09, 2024 4:25 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Extra Biax in Tip Area for increased torsional stiffness?
- Replies: 3
- Views: 113
Re: Extra Biax in Tip Area for increased torsional stiffness?
You can use a different biax front and rear with overlap under the bindings. Will give you a smoother flex/torsion curve then changing somewhere in the flex zone
- Tue Jun 13, 2023 1:42 am
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: CNC edge bender ?
- Replies: 5
- Views: 4507
Re: CNC edge bender ?
There is a chinese company, i did see a video some time ago. Sorry cant give you more detail, try to find it on YT
- Thu Mar 31, 2022 4:37 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Sublimation warping
- Replies: 7
- Views: 7023
Re: Sublimation warping
Ooops...I got some new ideas! :D Things that I have not foreseen in my sublimation process, The cooling down aspect/press! Always something! ;) ;) I just wonder about the temperatures they do. Isosport told me also a high value like that, but on my tries i managed to melt the paper into the materia...
- Thu Mar 31, 2022 4:35 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Sublimation warping
- Replies: 7
- Views: 7023
Re: Sublimation warping
Fighting the snake The idea of 2 cool down presses is neat, when you do more topsheets in a queue one press gets too hot after a while. Or you add active cooling (air or water)
- Fri Mar 18, 2022 9:27 am
- Forum: Aprés Ski Building
- Topic: NEW to the GROUP
- Replies: 3
- Views: 4700
Re: NEW to the GROUP
Press: C 3
Grinder: There i no rocket science in these machines, i work on one right now. Just some bearings, belts, hoses and a little bit of electric stuff.
Grinder: There i no rocket science in these machines, i work on one right now. Just some bearings, belts, hoses and a little bit of electric stuff.
- Fri Feb 04, 2022 6:43 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Flaxfiber sidewall/ sidecut
- Replies: 9
- Views: 6036
Re: Flaxfiber sidewall/ sidecut
Anyways, vacuum doesnt create optimal pressure for flax. You either need to be very careful with the amount of resin you use (exactly the right amount) or you should press it with 5bar in a pneumatic press. This is what Bcomp was saying afair.
- Wed Dec 22, 2021 4:44 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Location of the boot center using the exact center of the ski
- Replies: 3
- Views: 2136
Re: Location of the boot center using the exact center of the ski
Think they refer to relative position to the recommended/marked binding center.
What Tim is saying could be right from shapers view, but a normal tester cannot determinate exactly where sidecut center is (visually).
What Tim is saying could be right from shapers view, but a normal tester cannot determinate exactly where sidecut center is (visually).
- Fri Dec 17, 2021 12:47 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Epoxy sticking to base
- Replies: 6
- Views: 2362
Re: Epoxy sticking to base
You can put a self adhesive protection foil on it. Your skiman could also start with 80 or 60 grid
- Sun Nov 28, 2021 3:05 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Trimming edgeless snowboard tail/nose
- Replies: 4
- Views: 2077
Re: Trimming edgeless snowboard tail/nose
You dont cut your base to the final shape before laminating?
Otherwise you just use your base as template to cut and trim, freehand
Otherwise you just use your base as template to cut and trim, freehand
- Sat Nov 06, 2021 12:37 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Finishing Veneer with Epoxy bleed through
- Replies: 2
- Views: 4006
Re: Finishing Veneer with Epoxy bleed through
Soak the top with epoxy, then sand it. Should be more uniform (depending how hot you press)
- Tue Oct 26, 2021 2:16 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Increase in camber of the ski after getting out of the press.
- Replies: 8
- Views: 3162
Re: Increase in camber of the ski after getting out of the press.
i add to Chrismp post: You need to calibrate both your pids with a proper setup, put a old ski/board inside the press and run the calibration. Main reason is the asymetric heat sink of a press and its molds. E.g. on bottom you have just the mold, on top you have the cattrack which reacts completely ...
- Tue Oct 26, 2021 2:12 am
- Forum: Ski/Snowboard Design and Layup
- Topic: Increase in camber of the ski after getting out of the press.
- Replies: 8
- Views: 3162
Re: Increase in camber of the ski after getting out of the press.
You stay with one process (hot or cold cure) and dial in your workflow and molds (more or less pre camber). You need to do the same heat & cool down process (including time of pull) every time for heated systems.
- Fri Jul 30, 2021 11:40 pm
- Forum: Journals: Log Your Ski Building Progress
- Topic: Jonrezz’s Build Log
- Replies: 94
- Views: 47638
Re: Jonrezz’s Build Log
Look into GRBL code $130-$132