What MM says!

19mm down to 7mm... it's over 60%!
They didn't have any thinner planks?

Cool! I will get a Jigarex!

Just a silly/stupid question: How couldn't you tell in the first place?

I have nothing to add other than I've invested in a real jig from Marker.
Mounting hasn't been easier! (If using Marker bindings... )

Thanks! I'm impressed myself. I knew the result was going to be ok, but this is almost unreal! :) The surface and colours are crisp clear! It doesn't really show in the picture. One of the best thing with this ski building project is that I have learned to been very patient and precise. Working my w...

Dtrain wrote:You doin the sub yourself?

Yes

First pair after entering the world of sublimation. I'm fascinated!

skidesmond wrote:

backyardskier wrote:When attaching the wood sidewalls to the cores which is better wood glue or epoxy?

Use exterior wood glue. It's cheaper and it works just fine.

Check!
Even regular wood glue works fine

Nice work and journal! This must be a very expensive ski in terms of labour.

Actually I do 1 or 2 layers of varnish fist then the transfer. Just to get a more even surface to make the transfer on to. It bonds fast and good. Then a couple of varnish layers over that. I used matte on these.

Transfer Ink to wood. There are several "tutorials" on YT.

This is just one.
Instead of waxpaper I use transparent.
The Gel is magic.
http://youtu.be/qSfj6eiNzew

Ha ha :) I have forget the VDS too many times not to do it again. Trust me, I've made a checklist! :) The only mishaps I have had lately is that some builds gets "mysteriously" stiff... I will show you the stenciled logo technic. I "stole" it from a YouTube clip I found. Now I ha...

Thanks! They came out really well. I'm getting good at this now...

First build this summer. New addition to the OAC models, OAC-7 Specs: Core: Poplar/ash - 50/50 Composite: Triax 600g/m² - Entropy Super sap Tip: 128mm waist: 72mm tail: 106mm r=13.5m?? Length: 170cm Just flexing it, it feels quite rigid! I have a good feeling... :-) https://lh3.googleuse...