Ill be at Mt. Snow tomorrow and Saturday and Wachusett Sunday

messaged you

I might be interested... gotta check my disposable money situation.

With the clippers do you guys find the edges warping up and down? As I am putting the bend around the nose and tail, the edges tend to warp up or down.

I am sorry it has taken so long. Started first "real" job since I graduated college in May, takes up more time than I thought. I will try to have the tests and pictures up this weekend.

Sorry for the lack of testing so far. I will try to do a bunch of samples within the week.

@MontuckyMadman I have no idea if this is the best way to go about this, but for my first time trying to profile the core I used this flute cut. http://i1262.photobucket.com/albums/ii617/jukesnowboarding/fasfasd_zpscdf8fa40.jpg This was something I just did really quickly so the measurements do not ...

@chrismp I got the 3x8 machine which actually works out to being 6 inches longer in both directions. Over the next couple days I will try to do some tests on the cuts and report back with my findings. @MadRussian Ya the Bosch Colt has a 1/4 shank, and with my trial cuts I had a 1/4 and 1/2 bit. 3/4 ...

@Sammer I am using a Bosch Colt which is like between $99-120 depending on where you get it. On the Mogul site they sell that cheap router, but there is also a page with a list of about 10 routers that work perfect on it from Craftsman to Dewalt. I need to buy a larger bit. The one I had for the fir...

I had to tell the tool paths where to go. No 3d profile. And I dont know much about programs, but I have Aspire 3.0 from the disk I got with the machine. I haven't questioned it.

@skidesmond For the like 0 I know about CNC machines it seems pretty good for the price. I know some people were worried because it was so cheap, but for everything I have tried so far it has done it fine. I will have to do more tests to tell for certain. Also my shop area is in Northborough Ma, so ...

@Twizz So far so good I have not noticed any loss in suction, unless I leave extra holes exposed. After buying the Mogul you are invited to a owners group, so I have been bouncing ideas off of Sean at Donek while I learn what I can about using this for boards.

I forget to mention I had zero knowledge on anything related to CNC machines other than what I have read here, and the templates I have had made in the past. My first cut with the machine was terrifying, but came out better than I could have thought. And after the first weekend I started to get the ...

Thought I would finally start a log and make a resolution to keep up with it through this coming season of builds. Just graduated college in May, so I thought this might be one of the best times to blow some money on something yet unknown. So I jumped on the grenade that is the CNC Mogul and so far ...

Believe I found my answers buried in the forums. Woo