My experience is if you contact enough chinese makers the min order qty of anything almost will reach $100.00 usd shipped. As long as your cool with qty 100 straps at $100.00usd shipped they will do it. Dolla dolla bill yall....

So the ski had less camber and more rocker. From my experience its more about what side reaches the resins glass trans temp first. If its the bottom, more camber if its the top, more rocker. The carbon is definaetly a shinkage deal. Always the most rocker and camber, thats why you have to cure it to...

That might make sense but then why do my carbon skis have twice the camber as my glass skis. I have to cook top heavy by 25 degrees f to get normal camber in my carbons.

1. Yes.

I know this has been an issue before with other larger makers when metal is added.
I would only do one layer with an asym layup and .6mm sounds mighty thick but I dont really know.

See amp

Or buy some 45/45 biax (double bias) and use that on the 0/90 orientation...
Or lay up the tow on a 45/45 woven with fiberglas tape and use that 0/90 or do a backflip.

You coild orient the plain weave on the bias and use the tow on the 0. Woild be like triaxial 45/45 0.

The less resin in the laminate the stiffer the board will be.
Pressing at room temp means you evacuate more resin during the cycle making the fiber to resin ratio leaner.

What weight biax is it?
U have to have synth n on the 0 axis.
skis bend that way.

Sd. I would be willing to bet that would not work to profile core. It would get clogged super quick.the belts on those over head sanders are like 4 feet in diameter.

Jesus. Pretty sure you can can find used timewasters for 10k. That thing will do it all.

I dont think you can hack that 1430. I have a new in box 1400 nver used I can sell you if you are interested.

Giant overhead belt sander like a timewaster works really well but not everyone has one.

Max seal works. Best I. Very thin layers and aplied very quickly. While its tackly aply another coat. It sticks any surface confaiminats make it peal.