im not doing heated cures.. is it ok to do the 'carbon at top fiberglass at bottom' layup??

i still need an answer about the weight of the carbon...
the fiberglass is 744g/m, 3 dierctions weave(o,45,90). and lets say the carbon will be also 3 directions.. what weight do i need?@!?~!?~!?!~?~!? helpppp

hello, in the previous board that i built there were 2 layers of fiibrglass which i ordered from skibuilders store. they are 744g/m^2 each, so for the whole board i had 1488g/m^2. now, for my new boards i wanted the top composite layer to be Carbon (for strengh and to get a black color under the top...

i used Loctite (a very expencive and strong one called "loctite 3904") for laminating my UHMW sidewalls, after flame treating the plastic.

it turened out very good and its a very fast procces.

^_^kipi

great looking board!

can you please give me info about sublimation process?

thanks

i understand

but on which material are you doing it? the plastic topseet or a fabric layer (that will be under a clear topsheet)??
and on what side? what kind of ink/color??

i also need some info about sublimation..

1. does it go on the topsheet or on cloth(cotton)??
2. if on topsheet on what side??
3. when i go to printing shop what do i tell them?? what kind of printing/ink to use?

help!!
tnx