Search found 557 matches
- Wed Oct 09, 2013 2:26 pm
- Forum: Journals: Log Your Ski Building Progress
- Topic: Time...For another...
- Replies: 16
- Views: 14215
- Wed Oct 09, 2013 7:45 am
- Forum: Journals: Log Your Ski Building Progress
- Topic: Time...For another...
- Replies: 16
- Views: 14215
Hey Ben, Kind of a bad (?) habit of mine to enjoy a fresh cold brew while doing the lay-up. Caution is always applied so I don't accidentally drink from the wrong cup! The vds you see were left over pieces and decided to just put them in. As for location, I was kinda thinking of the dampening as wel...
- Tue Oct 08, 2013 7:15 pm
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: inflating the fire hose
- Replies: 7
- Views: 5683
- Tue Oct 08, 2013 7:03 pm
- Forum: Journals: Log Your Ski Building Progress
- Topic: Time...For another...
- Replies: 16
- Views: 14215
Time...For another...
So... I've volunteered to build a set of skis to be auctioned off to raise money that is used for burned out families. I have been waiting for the tops to be printed and in the mean time I have everything else prepared and ready to go. What to do? I made another set and decided to press it. Here is ...
- Wed Sep 18, 2013 8:34 am
- Forum: Ski/Snowboard Design and Layup
- Topic: please criticize my latest project!
- Replies: 9
- Views: 6074
I kinda agree. But think of this. When looking at skis and checking the camber, What do we do? We set the skis base to base and squeeze them together with our fingers, right? So with just finger pressure we are able to flatten out the camber. Just think what body weight will do... I may be totally w...
- Mon Sep 16, 2013 4:31 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: please criticize my latest project!
- Replies: 9
- Views: 6074
- Tue Sep 03, 2013 9:35 am
- Forum: Aprés Ski Building
- Topic: Happy People
- Replies: 10
- Views: 12530
- Tue Sep 03, 2013 9:05 am
- Forum: Ski/Snowboard Design and Layup
- Topic: multi piece edges
- Replies: 2
- Views: 2361
multi piece edges
Whats the word on this? Using drop pieces of edge material together to complete a ski / board. How much strength does the edge provide to the ski / board? If I was a park skier, I would think this would be a bad idea, but thinking of powder ski / board? I think there are a few that have even gone ed...
- Fri Aug 30, 2013 6:26 am
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: belts belt and belts
- Replies: 4
- Views: 3979
- Thu Aug 29, 2013 5:54 pm
- Forum: Equipment and Tools (e.g., ski press, core profiler, etc)
- Topic: belts belt and belts
- Replies: 4
- Views: 3979
belts belt and belts
Been a while since I had a need but I can't seem to remember where I purchased sanding belts. Any ideas?
SNB350 80 grit
Thanks,
ra
SNB350 80 grit
Thanks,
ra
- Tue Aug 27, 2013 9:55 am
- Forum: Ski/Snowboard Design and Layup
- Topic: snapping tip spacer joints left and right
- Replies: 26
- Views: 13053
I had a problem with the cracking across the tip spacer and core line. I cut straight across. My problem with this set of skis was that I did not overlap the joint with the skis edging. In other words the edge stopped before the joint. It is my belief that if the edge were to overlap the joint betwe...
- Tue Aug 27, 2013 9:52 am
- Forum: Ski/Snowboard Design and Layup
- Topic: snapping tip spacer joints left and right
- Replies: 26
- Views: 13053
I had a problem with the cracking across the tip spacer and core line. I cut straight across. My problem with this set of skis was that I did not overlap the joint with the skis edging. In other words the edge stopped before the joint. It is my belief that if the edge were to overlap the joint betwe...
- Mon Jan 28, 2013 9:06 pm
- Forum: Aprés Ski Building
- Topic: breckenridge?
- Replies: 6
- Views: 4785
- Tue Jan 22, 2013 10:38 pm
- Forum: Ski/Snowboard Design and Layup
- Topic: Gluing edges to base
- Replies: 15
- Views: 9043
- Tue Jan 15, 2013 2:35 pm
- Forum: Journals: Log Your Ski Building Progress
- Topic: Figment Original taking shape!
- Replies: 85
- Views: 64428