Seattle/Eastside area get together for local builders?

Yak away here, please! This category is for random discussions, comments, and anything but the topics shown above.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

neatturns
Posts: 49
Joined: Thu Jul 28, 2011 1:15 pm
Location: USA

Post by neatturns » Tue Apr 07, 2015 3:50 pm

Does anyone want to throw some dates out to see if we can make this happen?

RYM Experimentals
Posts: 85
Joined: Fri Dec 21, 2012 8:57 pm
Location: Fall City, Wa.
Contact:

Post by RYM Experimentals » Tue Apr 07, 2015 6:52 pm

How about a Sunday afternoon so traffic is light for everyone to get there. Ill throw April 26th or May 3rd out there for starters. Roanoke Tavern on Mercer Island is a cool place and shouldn't be too busy then. Great bar if you've never been there and they have a nice outdoor area if the weather is nice. Once we get a date and a head count, Ill call ahead and see if I can get the back room reserved.
www.rymexp.com
On the edge of control is a good place to be!

twizzstyle
Posts: 2203
Joined: Tue Mar 07, 2006 8:25 pm
Location: Kenmore, Wa USA

Post by twizzstyle » Tue Apr 07, 2015 8:58 pm

Either of those dates work for me, the 3rd is probably better.

Bags
Posts: 5
Joined: Sun Jan 31, 2010 6:50 pm
Location: Seattle

Post by Bags » Thu Apr 09, 2015 10:17 am

im free on the 26th

pmg
Posts: 435
Joined: Sat Dec 01, 2012 8:59 am
Location: Sonthofen

Post by pmg » Thu Apr 09, 2015 12:55 pm

Wow, lifts still running in early may? nice!

Greetings from Europe

twizzstyle
Posts: 2203
Joined: Tue Mar 07, 2006 8:25 pm
Location: Kenmore, Wa USA

Post by twizzstyle » Thu Apr 09, 2015 8:39 pm

We aren't meeting up for skiing!

RYM Experimentals
Posts: 85
Joined: Fri Dec 21, 2012 8:57 pm
Location: Fall City, Wa.
Contact:

Post by RYM Experimentals » Fri Apr 10, 2015 9:34 pm

But the lifts are still running for the next 2 weekends. Headed to White tomorrow unless Crystal gets a better dump. Game time decision. Looking forward to meeting everyone, hopefully we can make the 1st Annual PNW Builders Convention happen, even if it is just a few of us. If anyone is heading to White or Crystal tomorrow, let me know and maybe we can hook up for a few turns.

Cheers, -D
www.rymexp.com
On the edge of control is a good place to be!

neatturns
Posts: 49
Joined: Thu Jul 28, 2011 1:15 pm
Location: USA

Post by neatturns » Mon Apr 20, 2015 8:09 pm

Anyone up for trying to make May 3rd work?

twizzstyle
Posts: 2203
Joined: Tue Mar 07, 2006 8:25 pm
Location: Kenmore, Wa USA

Post by twizzstyle » Wed Apr 22, 2015 5:52 am

3rd works for me.

RYM Experimentals
Posts: 85
Joined: Fri Dec 21, 2012 8:57 pm
Location: Fall City, Wa.
Contact:

Post by RYM Experimentals » Thu Apr 23, 2015 5:36 pm

OK lets make it official, 3rd of May it is! Roanoke tavern, Mercer Island, Wa. 2pm work for everyone? Ill be there a bit early to get a table and Ill wear a dark grey 'Whistler/Blackcomb hat' so you can find me. If its nice out, make sure to look outside in the back as well.

Email me at don@rymeexperimentals if you want/need my cell number or send me a PM.

Mike, can you make this? Looking forward to meeting you all.
-Don from Ryme

Roanoke address... 1825 72nd Ave SE, Mercer Island, WA 98040

Link to directions...

http://www.bing.com/local?lid=YN925x157 ... cer+island

And bring some pics of your builds or better, throw a few in the car and we can have a show and tell in the parking lot. There's usually parking available in the rear behind the tavern.
www.rymexp.com
On the edge of control is a good place to be!

twizzstyle
Posts: 2203
Joined: Tue Mar 07, 2006 8:25 pm
Location: Kenmore, Wa USA

Post by twizzstyle » Fri Apr 24, 2015 5:55 am

Great, I'm in. I'll bring a few pairs.

neatturns
Posts: 49
Joined: Thu Jul 28, 2011 1:15 pm
Location: USA

Post by neatturns » Fri Apr 24, 2015 8:17 pm

I will be able to make it.
thanks

User avatar
richie
Posts: 183
Joined: Wed Jun 23, 2010 7:25 pm
Location: New Zealand
Contact:

I'll skype in and have a beer with you fellas!!!!

Post by richie » Sat Apr 25, 2015 3:32 pm

hey guys, sounds very geeky but I would be keen to join in albeit from a distance. If any one of you guys are suitably equipped with an iphone or what ever I'll skype you guys and have a beer with you while you are having dinner!!!!! cheers, Rich
MonkeyCAM and SnoCAD - https://github.com/mikemag
Ski binding mounting https://github.com/splitn2/DrillSki

Richard Harcourt | www.splitn2.com | Christchurch New Zealand
rich@splitn2.com | www.facebook.com/splitn2

RYM Experimentals
Posts: 85
Joined: Fri Dec 21, 2012 8:57 pm
Location: Fall City, Wa.
Contact:

Post by RYM Experimentals » Sat Apr 25, 2015 9:33 pm

While we live in Microsoft land, I don't know if were that cool to make this happen via Skype or other methods right now. Ill take some pictures to post and my hope is that this movement grows over time. Maybe someday we can broadcast live but for now I'm just happy to get a few of us together to shoot the shit. Ill take notes and let everyone know how the discussion goes. Thanks for all of your support.
www.rymexp.com
On the edge of control is a good place to be!

Head Monkey
Posts: 280
Joined: Sun Jul 17, 2005 4:53 pm
Location: Carnation, WA
Contact:

Post by Head Monkey » Sun Apr 26, 2015 3:39 pm

Yup, I can make it.
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X

Post Reply