Page 1 of 1

Die Cut Machines

Posted: Fri Mar 29, 2013 5:27 am
by skidesmond
Anyone using a die cut machine for graphics/logos, etc.? I'm looking for something that can die cut vinyl lettering, maybe thin wood veneer and mother of pearl. I've searched the internet so I know there are vinyl cutters out there for under $300 that look like they would do the job, don't know if they can handle wood veneer (1/42inch thickness) or mother of pearl (.015mm - .12mm) since both materials are brittle.

Not looking for big CNC machine for die cutting base material.

Just wondering what other people might be using.

Posted: Fri Mar 29, 2013 7:15 am
by hegan
I don't see why it wouldn't work, but you will go through blades fast cutting those materials.

Posted: Fri Mar 29, 2013 9:21 am
by skidesmond
The die cutters I've seen on the internet all cut paper, vinyl and heavy card stock. Some are capable of making multiple passes to cut through the materiual, that's the the type I'm eying.

http://www.joann.com/provo-craft-cricut ... 11180452a/

Posted: Fri Mar 29, 2013 9:58 am
by hegan
Those I'm not to sure about, I say just use an exacto knife with an outline. Those die cutters blades are just mini knifes. might take more time but it beats spending a lot on a cutter that might or might not work.

Posted: Fri Mar 29, 2013 11:43 am
by skidesmond
Yea, read the reviews on that one and most were bad.

Posted: Sat Jan 18, 2014 11:21 am
by gketcham
Who all is doing die cut bases by hand? I am going to do one in my next pair of skis, wondering if anyone has some good DIY tips. The xacto knife I have sucks and needs new blades. So I actually just freehanded the cut with a utility knife. I am cutting a lot of rounded corners and tight curves, so it was pretty difficult. Thanks

Re: Die Cut Machines

Posted: Sat Feb 29, 2020 12:34 pm
by TylerTrima
@skidesmond which one did you end up buying? Would you recommend it?

Sorry for being off topic.

I'm in the market for a vinyl cutter and I sure could use some help. Where did you get started? Because there are a number to choose from. At the moment I don't want to shell out a lot of money so I was looking at desktop vinyl cutters. I've got tired of all the hype reviews that were on the net. And actually managed to find one that seems legit. On this web-site I've found a review that was critical. It actually showed the flaws of each machines. What do you think which one would be better.

Any help is appreciated

Re: Die Cut Machines

Posted: Wed May 13, 2020 10:12 am
by Dodwood
Hi, this cricut machine looks interesting, wonder if it's good as it looks.
https://cricut.com/en_us/cricut-maker?_ ... 1589391402

Re: Die Cut Machines

Posted: Sun Jan 24, 2021 10:55 am
by still
Dodwood wrote: Wed May 13, 2020 10:12 am Hi, this cricut machine looks interesting, wonder if it's good as it looks.
https://cricut.com/en_us/cricut-maker?_ga=2.121263048.1553777534.1589391402-602624242.1589391402
For me, it works well. Pretty simple to use, no need to have extra skills