White background for sublimated grafics

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
Lerio
Posts: 16
Joined: Mon Aug 25, 2014 11:54 am

White background for sublimated grafics

Post by Lerio »

I would like to using sublimation for my grafics but before start building all the stuff needed I want to find the best way to create a white background. In my firsts attempts I laminate the topsheet with 2 layers of 40g/m^2 of FG using a resin mixed with a white pigment at 5% (max allowed), on top I put peelply so I have a rough surface for a better bounding during ski lamination later.

The results are still too translucent for what I need, I am open to suggestions.

User avatar
MontuckyMadman
Posts: 2393
Joined: Fri Jun 20, 2008 9:41 pm

Post by MontuckyMadman »

sammer wrote: I'm still a tang on top guy.

motoman
Posts: 243
Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine

Post by motoman »

henelit backnoat opaque epoxy paint

Lerio
Posts: 16
Joined: Mon Aug 25, 2014 11:54 am

Post by Lerio »

Ok, so epoxy ink is the way to go. What about the techniqe, what is the best way to put it on the topsheet?

User avatar
chrismp
Posts: 1322
Joined: Fri Feb 13, 2009 9:00 am
Location: Vienna, Austria

Post by chrismp »

just refer to the instructions of the manufacturer. they know best how to apply their product.

Post Reply