Turbocad Pro 14

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
madclimber03
Posts: 20
Joined: Fri Jun 29, 2007 7:54 am
Location: Jackson, WY

Turbocad Pro 14

Post by madclimber03 »

So I took the plans to build the press from this web site and finished it up no problem. Since then i have started playing with snow cad and have printed some of the top views of my skis. Looking at some forums i noticed that i needed an additional cad program to print the side view to cut my molds for my press. I looked on the internet and got a free trial version of turbocad. I have been able to bring up all of my drawings in turbocad but i have no idea how to print off just the ski in full length. When i do a one to one ratio it tries to print about 100 pages. Does anyone have any suggestions on how to print from turbocad? Or any suggestions on other programs or places that can support a dxf file that can print what i need?
hugocacola
Posts: 191
Joined: Thu Mar 22, 2007 8:00 am

Post by hugocacola »

just use dxf form snowcad and use it with autocad, turbocad sucks,... good luck
Post Reply