Large Pneumatic Ski Press For Sale 36cm x 270cm
Posted: Sun Feb 12, 2017 11:54 am
Cavity measures 360mm x 2700mm Cavity Height is 460mm
The main structure is built out of 4 W16x40 I beams. The ends of the W16x40 beams are bolted to cages that have been welded out of C6x10.5 C channel. There are 2 extra I beams also that were going to be used for a double press.
2 - 2100mm x 350mm MEI heat blankets that are on individual Auber SYL-2352P PID controllers
4 - 170lbs pneumatic rams controlled separately from the hose
1" aluminum cat track 2100mm in length
Adjustable top mould setup
$5000
Located in Park City, UT
The main structure is built out of 4 W16x40 I beams. The ends of the W16x40 beams are bolted to cages that have been welded out of C6x10.5 C channel. There are 2 extra I beams also that were going to be used for a double press.
2 - 2100mm x 350mm MEI heat blankets that are on individual Auber SYL-2352P PID controllers
4 - 170lbs pneumatic rams controlled separately from the hose
1" aluminum cat track 2100mm in length
Adjustable top mould setup
$5000
Located in Park City, UT