change clear Duraclear -> PBT

For discussions related to the type of materials to build skis/snowboards and where to get them.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
vol
Posts: 46
Joined: Thu Jan 13, 2011 7:03 am
Contact:

change clear Duraclear -> PBT

Post by vol »

I would like to change
clear glossy Topsheet (Duraclear), its covered with a thin protection film.
width : 56 cm
thickness : 0.3 mm
aprox 25m
I bought from boardbuildingsupply.eu

TO

PBT ~50cm suitable for sublimation

I'm from Europe, Lithuania

saul @ go2kite dot com
ben_mtl
Posts: 583
Joined: Mon Mar 31, 2008 1:47 pm
Location: Sherbrooke, Quebec
Contact:

Post by ben_mtl »

What's that mystery 0.3mm Duraclear ??? I see the name on some websites in Europe but when I call Crown to ask them about this thin Duraclear they say they just have the thicker 0.75mm (or so) not-that-clear stuff with no protective tape...
I would have been interested in you topsheet but I'm in Canada... shipping would kill me. Sorry for the tread hijack !
A bad day skiing is always better than a good one at work...
vol
Posts: 46
Joined: Thu Jan 13, 2011 7:03 am
Contact:

Post by vol »

I dont cnow really, maybe is not exactly duraclear, I have to ask Fabian from boardbuildingsupply.eu
plastic bond well, transparent and with protection tape.
tomorrow I'll take photos of plastic
Post Reply