Complete Kit with press, bladder, profiler ,glass, edges etc

For non-commerical sales of materials, equipment, and resources related to ski/snowboard building

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
powdercow
Posts: 76
Joined: Mon Jul 31, 2006 1:35 pm
Location: Orem, Utah

Complete Kit with press, bladder, profiler ,glass, edges etc

Post by powdercow »

After six years of no use and a shrinking garage and shrinking personal time I'm selling my whole setup.

Lots of pics and specs here:
http://www.skibuilders.com/phpBB2/viewt ... highlight=

Ad I put up on KSL here:
https://www.ksl.com/index.php?nid=218&a ... 94&cat=414

I'm in Utah and asking $850 for the whole setup.

Doesn't have a heat blanket fyi.
- Ben
User avatar
MontuckyMadman
Posts: 2395
Joined: Fri Jun 20, 2008 9:41 pm

Post by MontuckyMadman »

iF YOU WANT TO PART IT OUT i WILL TAKE THE RUBBER AND BASE.
iS TEH BASE 1.3MM AND TEH RUBBER TEH 3/4 INCH WIDE?
sammer wrote: I'm still a tang on top guy.
powdercow
Posts: 76
Joined: Mon Jul 31, 2006 1:35 pm
Location: Orem, Utah

Post by powdercow »

I'm trying not to parse out at this point but if it gets there I'll let you know. Base is definitely 1.3, I'll have to measure rubber but it's close.
- Ben
Post Reply