does anyone know where I can get some caps for the my 2"x2" steel tubing ends? I want them to fit inside the tubes and cover the ends like these
http://www.levelingmounts.com/caps/
thanks
steel tubing caps
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
- Carvejunky
- Posts: 18
- Joined: Wed May 03, 2006 4:35 am
- Location: Ohio Highlands
- Contact:
Tubing caps
zachjowi,
I was at my local Lowe's store yesterday and they had the caps for 2x2 .125 wall in house. You might try a home depot also if you have either around were you live.
Carvejunky
I was at my local Lowe's store yesterday and they had the caps for 2x2 .125 wall in house. You might try a home depot also if you have either around were you live.
Carvejunky
- Head Monkey
- Posts: 310
- Joined: Sun Jul 17, 2005 4:53 pm
- Location: Carnation, WA
- Contact:
As team08 said, McMaster-Carr is your friend:
www.mcmaster.com
Part #9565K31, Square Polyethylene Plug Smooth, Fits 2" Tube Od, 1.760" Tube Id, sold in packs of 50 for $8.84.
Enjoy...
www.mcmaster.com
Part #9565K31, Square Polyethylene Plug Smooth, Fits 2" Tube Od, 1.760" Tube Id, sold in packs of 50 for $8.84.
Enjoy...
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X