steel tubing caps

For discussions related to the type of materials to build skis/snowboards and where to get them.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
User avatar
zachjowi
Posts: 110
Joined: Sat Aug 26, 2006 10:41 am
Location: WI

steel tubing caps

Post by zachjowi »

does anyone know where I can get some caps for the my 2"x2" steel tubing ends? I want them to fit inside the tubes and cover the ends like these

http://www.levelingmounts.com/caps/

thanks
team08
Posts: 55
Joined: Thu Nov 10, 2005 3:34 pm

Post by team08 »

I bet Mcmaster has some, they have everything!
User avatar
Carvejunky
Posts: 18
Joined: Wed May 03, 2006 4:35 am
Location: Ohio Highlands
Contact:

Tubing caps

Post by Carvejunky »

zachjowi,

I was at my local Lowe's store yesterday and they had the caps for 2x2 .125 wall in house. You might try a home depot also if you have either around were you live.

Carvejunky
User avatar
Head Monkey
Posts: 310
Joined: Sun Jul 17, 2005 4:53 pm
Location: Carnation, WA
Contact:

Post by Head Monkey »

As team08 said, McMaster-Carr is your friend:

www.mcmaster.com

Part #9565K31, Square Polyethylene Plug Smooth, Fits 2" Tube Od, 1.760" Tube Id, sold in packs of 50 for $8.84.

Enjoy...
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
Post Reply