Jigsaw/bandsaw flashing blades going dull. Suggestions?
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
- Head Monkey
- Posts: 310
- Joined: Sun Jul 17, 2005 4:53 pm
- Location: Carnation, WA
- Contact:
For the jigsaw, there is no substitute: http://remgrit.com/rg-carbidegrit-jb.html I’ve used exactly two of these over the past 7 years or so.
See this topic also, where Rich found something similar: http://www.skibuilders.com/phpBB2/viewt ... sc&start=0
See this topic also, where Rich found something similar: http://www.skibuilders.com/phpBB2/viewt ... sc&start=0
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
For jig saws check out the Bosch T130RF or T150RF for Ceramics!
Cheers, Christoph
Cheers, Christoph
Last edited by Jibber on Thu Dec 22, 2011 1:04 pm, edited 1 time in total.
-
- Posts: 73
- Joined: Mon Feb 07, 2011 8:39 pm
I have to jump on the bandwagon for the Bosch jig saw blades as well. I cant say for certain how long they last, but I cant remember the last time I had to change a blade. For what it's worth, we've knocked out 4 pairs and a snowboard this past week with the current blade.
Planer blades though......dont get me started.
Planer blades though......dont get me started.