DIY Silicone Heat Blanket
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
-
- Posts: 217
- Joined: Sun Jan 22, 2012 10:03 pm
- Location: The Dalles Oregon
My blanket project,
nichrome 0.6mm 3.88 OM - 14m - it's aprox 1kw
botom triaxial with mat
top biax
silicon shore A60, 1kg was little not enough.. you can see some spots on pictures, 1.5 kg would be nice
budget: blanket around 70euro, temperature control 110euro
I press blanket when silicon hardens between wood panel in my press with 4bar presure
finally bottom side with mat looks very well, blanket work perfect, I made one board already!
Thanks all
nichrome 0.6mm 3.88 OM - 14m - it's aprox 1kw
botom triaxial with mat
top biax
silicon shore A60, 1kg was little not enough.. you can see some spots on pictures, 1.5 kg would be nice
budget: blanket around 70euro, temperature control 110euro
I press blanket when silicon hardens between wood panel in my press with 4bar presure
finally bottom side with mat looks very well, blanket work perfect, I made one board already!
Thanks all
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
-
- Posts: 217
- Joined: Sun Jan 22, 2012 10:03 pm
- Location: The Dalles Oregon
Here's the pictures I promised.[/img]
Last edited by troublemaker on Sun Apr 15, 2012 8:00 pm, edited 1 time in total.