big ear snowboards' cloth press
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 378
- Joined: Wed Nov 04, 2009 10:59 am
- Location: Portland Area, Maine
- Contact:
chrismp wrote:2mm sounds doable. the concern i have with building a rectangular box around the core is that you would need quite a bit more resin than just filling up a channel.
Yea I considered that. It has me thinking of making it a larger copy of the skis shape. That way it's not boxy and Im only leaving the amount of sidewall I need and not a ton of extra. Just enough to leave a smooth edge when cutting the flashing off.
My concern with leaving excess core and routing out the channel is wasting to much of my raw core material. I'm using bamboo and 4x8 sheets are expensive so I try to maximize the number of cores I get.
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
-
- Posts: 1354
- Joined: Mon Sep 17, 2007 7:37 pm
I don't understand what you guys are worried about.MontuckyMadman wrote:hey chris, how do you deal with heating to 70c and ball milling or shaking the pre polymer to get it all melted and even? You just mix it with a drill? That would put allot of air in it i bet.
what a pita
Every board I have ever built the epoxy was mixed with a drill. Yeah, it gets foamy, and has a shit ton of air mixed in. That has nothing to do with having air bubbles in your layup. Air bubbles in your layup are caused by voids of epoxy due to improper wet out.
Picturing people mixing their epoxy gently to keep any air out of the mix makes me laugh.
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
sry for the late reply. i just heat the resin in the microwave until its warm to the touch. that turns it liquid. then i add the hardener and mix it with one of those plastic knives. this introduces some bubbles but its not that bad. then i pour it into the channel in the core blank and let it sit at room temp until its cured.
-
- Posts: 1354
- Joined: Mon Sep 17, 2007 7:37 pm
@cam: we don't have issues with deflection. the cordura bags work great as a press frame. it's just not possible to load the press with just one person, thats why we're building a new steel frame press.
the wood used in the press is a couple sheets of formboard with a pyramid shape made of particle board on top of them. since the spacing between the cordura is so small it doesn't deflect in between the bags.
the wood used in the press is a couple sheets of formboard with a pyramid shape made of particle board on top of them. since the spacing between the cordura is so small it doesn't deflect in between the bags.