For non-commerical sales of materials, equipment, and resources related to ski/snowboard building
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
MadRussian
- Posts: 693
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Post
by MadRussian » Mon Aug 13, 2012 2:47 pm
I have lay flat 8" firehose 5 dollars linear feet plus actual shipping cost. If enough interest I can pressure test hose before start to cut it

-
Skiracer9x
- Posts: 1
- Joined: Mon Sep 17, 2012 6:35 pm
Post
by Skiracer9x » Mon Sep 17, 2012 6:50 pm
Hey Russian
I am building the press from the ski builders site but I am confused as to how much I need. I followed (am following) the instructions for their frame and I have approximately an 8" wide frame. Now their image for building the bladder shows two widths of hose but for a different press. I should only need 1 press length (8 feet). Do you still have that much and does that length seem correct to you?
-mike
-
MadRussian
- Posts: 693
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Post
by MadRussian » Mon Sep 17, 2012 7:12 pm
Skiracer9x wrote:Hey Russian
I am building the press from the ski builders site but I am confused as to how much I need. I followed (am following) the instructions for their frame and I have approximately an 8" wide frame. Now their image for building the bladder shows two widths of hose but for a different press. I should only need 1 press length (8 feet). Do you still have that much and does that length seem correct to you?
-mike
I do have what you need. I can only suggest go little bit longer like 9'
-
thedodge67
- Posts: 2
- Joined: Sun Sep 09, 2012 12:50 pm
Post
by thedodge67 » Sat Dec 29, 2012 10:03 am
Do you have any more available?
-
MadRussian
- Posts: 693
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Post
by MadRussian » Sat Dec 29, 2012 7:06 pm
thedodge67 wrote:Do you have any more available?
Yes I have more
-
MadRussian
- Posts: 693
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Post
by MadRussian » Tue Mar 26, 2013 12:27 pm
yes I got you covered.
For shipping cost:
18 to 20 feet approximately 22-23 pounds and fit in box 12x12x12
If only 8 – 9 feet needed I managed to squeeze it into small priority mail box.
For Canada due to weight limitation have to be 2 shipments of priority mail
-
infinityskis
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
Post
by infinityskis » Tue Mar 26, 2013 5:18 pm
Im in the us so its ok, how much would 22ft. be about??
-
JSquare
- Posts: 82
- Joined: Fri Sep 14, 2012 1:59 pm
- Location: NH
Post
by JSquare » Tue May 07, 2013 4:20 am
PM sent.
-
MadRussian
- Posts: 693
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Post
by MadRussian » Tue May 07, 2013 4:54 pm
JSquare wrote:PM sent.
I got you covered
-
Camania
- Posts: 10
- Joined: Tue Aug 27, 2013 10:00 pm
Post
by Camania » Thu Sep 05, 2013 11:41 am
still have any of this hose left?
-
MadRussian
- Posts: 693
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Post
by MadRussian » Thu Sep 05, 2013 2:43 pm
Camania wrote:still have any of this hose left?
Yes I do
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
-
MadRussian
- Posts: 693
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Post
by MadRussian » Sat May 24, 2014 3:42 am
I still have firehose if anybody need
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
-
bdankner
- Posts: 3
- Joined: Wed Feb 19, 2014 6:50 pm
Post
by bdankner » Mon Nov 17, 2014 6:44 pm
MadRussian wrote:I still have firehose if anybody need
If you still have any firehose left I would like to buy 8 feet from you. I live in St. Louis.