FS firehose East Coast

For non-commerical sales of materials, equipment, and resources related to ski/snowboard building

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

MadRussian
Posts: 694
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

FS firehose East Coast

Post by MadRussian » Mon Aug 13, 2012 2:47 pm

I have lay flat 8" firehose 5 dollars linear feet plus actual shipping cost. If enough interest I can pressure test hose before start to cut it

Image

Image

MadRussian
Posts: 694
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Post by MadRussian » Thu Aug 23, 2012 4:17 pm

firehose tested at 40 PSI

Image

Image

Image

Skiracer9x
Posts: 1
Joined: Mon Sep 17, 2012 6:35 pm

Fire hose

Post by Skiracer9x » Mon Sep 17, 2012 6:50 pm

Hey Russian
I am building the press from the ski builders site but I am confused as to how much I need. I followed (am following) the instructions for their frame and I have approximately an 8" wide frame. Now their image for building the bladder shows two widths of hose but for a different press. I should only need 1 press length (8 feet). Do you still have that much and does that length seem correct to you?
-mike

MadRussian
Posts: 694
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Re: Fire hose

Post by MadRussian » Mon Sep 17, 2012 7:12 pm

Skiracer9x wrote:Hey Russian
I am building the press from the ski builders site but I am confused as to how much I need. I followed (am following) the instructions for their frame and I have approximately an 8" wide frame. Now their image for building the bladder shows two widths of hose but for a different press. I should only need 1 press length (8 feet). Do you still have that much and does that length seem correct to you?
-mike
I do have what you need. I can only suggest go little bit longer like 9'

thedodge67
Posts: 2
Joined: Sun Sep 09, 2012 12:50 pm

Post by thedodge67 » Sat Dec 29, 2012 10:03 am

Do you have any more available?

MadRussian
Posts: 694
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Post by MadRussian » Sat Dec 29, 2012 7:06 pm

thedodge67 wrote:Do you have any more available?
Yes I have more

infinityskis
Posts: 87
Joined: Tue Dec 27, 2011 12:02 pm

Post by infinityskis » Mon Mar 25, 2013 8:16 pm

any left?

MadRussian
Posts: 694
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Post by MadRussian » Tue Mar 26, 2013 12:27 pm

yes I got you covered.

For shipping cost:
18 to 20 feet approximately 22-23 pounds and fit in box 12x12x12

If only 8 – 9 feet needed I managed to squeeze it into small priority mail box.

For Canada due to weight limitation have to be 2 shipments of priority mail

infinityskis
Posts: 87
Joined: Tue Dec 27, 2011 12:02 pm

Post by infinityskis » Tue Mar 26, 2013 5:18 pm

Im in the us so its ok, how much would 22ft. be about??

JSquare
Posts: 82
Joined: Fri Sep 14, 2012 1:59 pm
Location: NH

Post by JSquare » Tue May 07, 2013 4:20 am

PM sent.

MadRussian
Posts: 694
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Post by MadRussian » Tue May 07, 2013 4:54 pm

JSquare wrote:PM sent.
I got you covered

Camania
Posts: 10
Joined: Tue Aug 27, 2013 10:00 pm

Post by Camania » Thu Sep 05, 2013 11:41 am

still have any of this hose left?

MadRussian
Posts: 694
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Post by MadRussian » Thu Sep 05, 2013 2:43 pm

Camania wrote:still have any of this hose left?
Yes I do
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison

MadRussian
Posts: 694
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Post by MadRussian » Sat May 24, 2014 3:42 am

I still have firehose if anybody need
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison

bdankner
Posts: 3
Joined: Wed Feb 19, 2014 6:50 pm

Post by bdankner » Mon Nov 17, 2014 6:44 pm

MadRussian wrote:I still have firehose if anybody need
If you still have any firehose left I would like to buy 8 feet from you. I live in St. Louis.

Post Reply