The smooth on pot life is short as well.
When I mix I try not to add air into the mixture.
I can see some bubbles when pouring and the first batch there were some small air pockets.
I started to pass a flame over it to pull the bubbles out and that is working well. I'm getting a few dots on the surface from the bubbles popping, but otherwise good results without sucking the air out before. Probably 95%+ effective.
Urethane plastic vs rubber. What the difference?
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 141
- Joined: Sun May 02, 2010 8:21 pm
- Location: Sacramento, Ca
- Contact:
We have snowboard and kiteboard build kits!
https://prtahoe.com/collections/build-kits
https://prtahoe.com/collections/build-kits
You can download a pdf file with the Adiprene test results here: http://pdfcast.org/download/adiprene-lf ... e-cure.pdf