Additional VDS layers

artski · Post by **artski** » Thu Jan 17, 2013 4:01 pm

I'd be interested in some as well, for sure.

vinman · Post by **vinman** » Thu Jan 17, 2013 4:24 pm

MM is that the A. S. K. material that I have heard of? Heard it is pretty nice stuff.

FigmentOriginal · Post by **FigmentOriginal** » Thu Jan 17, 2013 7:34 pm

Some of the alpine board manufactures out there use rubber sheet as a dampening material. A board of mine that I cut apart had perforated rubber and below the titanal layers.

Does this rubber have to be a specific rubber like VDS? Better question, what type of rubber is VDS? Butyl, neoprene, EPDM, gum rubber? I''ll have to talk to Sean Martin from Donek to see what he uses.....

MontuckyMadman · Post by **MontuckyMadman** » Fri Jan 18, 2013 9:21 am

Yes ask is the japanese company asher sheet. Its the same but different.
It vulcanized rubber and noone in the world but these two companies makes this shit at least that I can find.

ben_mtl · Post by **ben_mtl** » Fri Jan 18, 2013 11:43 am

I would be in for a VDS group buy...

maximegb5 · Post by **maximegb5** » Fri Jan 18, 2013 3:10 pm

me too!

vinman · Post by **vinman** » Fri Jan 18, 2013 6:43 pm

I'd be in for 1inch VDS, I don't care about color. Need at least 150M

barnboy · Post by **barnboy** » Fri Jan 18, 2013 7:53 pm

In for a share.

FigmentOriginal · Post by **FigmentOriginal** » Fri Jan 18, 2013 9:57 pm

I'd be in for a group buy.

Here is the ASK Industries CO Ltd website.
http://www.ask.gr.jp/eng/asnersheet.html

More · Post by **More** » Sat Jan 19, 2013 1:12 am

I'd be keen if anyone can be bothered posting some to the ass of the world

olie25 · Post by **olie25** » Sun Jan 20, 2013 2:41 pm

also in for a group buy, id take a couple hundred meters!!

skimann20 · Post by **skimann20** » Sun Jan 20, 2013 7:17 pm

I could see getting in on this.

MontuckyMadman · Post by **MontuckyMadman** » Sun Jan 20, 2013 8:24 pm

The mins from ask are less but 3 times the price cause its japanese and prolly radioacive.
Its not that bad to order from cdw in single rolls.
Ill post some to kiwiland if you need it no prob.

mattman · Post by **mattman** » Tue Jan 22, 2013 11:42 am

MontuckyMadman wrote:We use rubber above and below on the uhmw.

Do you have any rabbets in the core to receive these VDS layers? The 1 edge layer seems a minimal impact (.008"), but once you have 3 layers in there...its nearing 1/32".

vinman · Post by **vinman** » Tue Jan 22, 2013 5:20 pm

matt, I read that as a single layer between the edge and base layer of glass and between the sidewall and top layer of glass.

Ski Builders Forum

Ski Builders Forum

Additional VDS layers