Definitely, but who said it would be a router? For speed purposes, we're interested in getting back to a planer or sander for profiling. That said, our searching to date hasn't been as fruitful as we hoped.falls wrote:Hi iggy
Had you thought about adding a second spindle to your current CNC and doing 2 things the same at once?
(rather than a whole extra CNC)
ON3P Skis
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
just out of curiosity. what time you have per core and what time you want to achieve?iggyskier wrote:Definitely, but who said it would be a router? For speed purposes, we're interested in getting back to a planer or sander for profiling. That said, our searching to date hasn't been as fruitful as we hoped.falls wrote:Hi iggy
Had you thought about adding a second spindle to your current CNC and doing 2 things the same at once?
(rather than a whole extra CNC)
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
Thomas A. Edison
I think I saw one on a skateboard maker website (planer head) - will see if I can find it again.
You guys look like you're getting pretty handy with DIY solutions. Could prob get a spiral cutter head and get a bracket machined up to hold a motor for belt drive.
You guys look like you're getting pretty handy with DIY solutions. Could prob get a spiral cutter head and get a bracket machined up to hold a motor for belt drive.
Don't wait up, I'm off to kill Summer....
These guys make custom aggregate heads for existing CNC Routers, including planer heads: http://www.techniksusa.com/aggregate/cu ... _heads.htm
Yeah Loaded Skateboards has one that looks pretty cool. We actually talked with him about it.falls wrote:I think I saw one on a skateboard maker website (planer head) - will see if I can find it again.
You guys look like you're getting pretty handy with DIY solutions. Could prob get a spiral cutter head and get a bracket machined up to hold a motor for belt drive.
A DYI solution is definitely under consideration.
Nice! We've actually looked at them before for their dust evacuation nut, but I will check out and see what they have in regards to planer heads.chrismp wrote:These guys make custom aggregate heads for existing CNC Routers, including planer heads: http://www.techniksusa.com/aggregate/cu ... _heads.htm
We've change our process a bit recently, but I think we profile & cut a core in around 8 minutes. The big thing is sidewalls...right now, we are profiling around 4-pairs worth in about 25 minutes. We can go faster, but the current process (cut/speed/bit style/bit size) is the process that has given us the best bond strength in peel tests. The CNC Planer our guys saw at CP was doing that amount in 2 minutes, so that would speed things up quite a bit.MadRussian wrote:just out of curiosity. what time you have per core and what time you want to achieve?iggyskier wrote:Definitely, but who said it would be a router? For speed purposes, we're interested in getting back to a planer or sander for profiling. That said, our searching to date hasn't been as fruitful as we hoped.falls wrote:Hi iggy
Had you thought about adding a second spindle to your current CNC and doing 2 things the same at once?
(rather than a whole extra CNC)
yeah that's the one
Man I wasted some time last night trying to remember and find that site!
I did find some of the aggregate CNC heads. They would be pretty dangerous in a skynet terminator rise of the machines situation!
https://www.youtube.com/watch?v=hKLCqMGUAXE
Man I wasted some time last night trying to remember and find that site!
I did find some of the aggregate CNC heads. They would be pretty dangerous in a skynet terminator rise of the machines situation!
https://www.youtube.com/watch?v=hKLCqMGUAXE
Don't wait up, I'm off to kill Summer....
I'd choose the type of planer head depending on your machine. If it doesn't have a spindle with one of the common tool chucks (HSK etc), I'd go the DYI route as Loaded did. Their design seems simple enough. Instead of their (probably custom) spiral planer drum, you could also use a series of moulder heads that can be coupled together.iggyskier wrote:Yeah Loaded Skateboards has one that looks pretty cool. We actually talked with him about it.falls wrote:I think I saw one on a skateboard maker website (planer head) - will see if I can find it again.
You guys look like you're getting pretty handy with DIY solutions. Could prob get a spiral cutter head and get a bracket machined up to hold a motor for belt drive.
A DYI solution is definitely under consideration.
- FigmentOriginal
- Posts: 140
- Joined: Mon Oct 24, 2011 1:13 pm
Great machines. We had their rep in, and even planned on sending them some materials to test out on their machines. Then we got their pricing, which "start around $150,000"....so not really in our price range. Definitely on the lookout for a used machine though.FigmentOriginal wrote:http://www.timesaversinc.com/timesavers ... ile-sander
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
probably not otherwise iggy already would have one.
From the picture above CNC machine have to be BIG… Commercial kind. My thought if small CNC cannot be retrofitted build new machine on frame of existing planar probably better option compared to the building machine from scratch. ...replace bottom part on carriage system, add external rails, use feed mechanism to move planar on the rails, replace handle on electric motor to already existing vertical feed system.... Of course new vacuum table
with some engineering and help of machine shop should cost less than retrofit option you mentioned
From the picture above CNC machine have to be BIG… Commercial kind. My thought if small CNC cannot be retrofitted build new machine on frame of existing planar probably better option compared to the building machine from scratch. ...replace bottom part on carriage system, add external rails, use feed mechanism to move planar on the rails, replace handle on electric motor to already existing vertical feed system.... Of course new vacuum table
with some engineering and help of machine shop should cost less than retrofit option you mentioned
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
Thomas A. Edison