sublimation press

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
neatturns
Posts: 49
Joined: Thu Jul 28, 2011 1:15 pm
Location: USA

sublimation press

Post by neatturns »

Thinking of building a sublimation press.
Does it require 2 heat blankets?

(will remove post if this has been covered before)

thanks
User avatar
chrismp
Posts: 1443
Joined: Fri Feb 13, 2009 9:00 am
Location: Vienna, Austria

Post by chrismp »

Mine works with just one blanket.
mikic1
Posts: 183
Joined: Tue Nov 15, 2011 11:51 am
Location: sweden

Post by mikic1 »

Its been covered before, see here,
http://www.skibuilders.com/phpBB2/viewt ... ight=epson

1 blanket is fine. There is a thread on chinese blanket suppliers so it should not cost you a lot.

Enjoy.
Post Reply