I just built a modified metal tube bender. Just a tube bender with a groove cut into it like the one seen here http://boardcrafter.com/content/view/24/34/
Super easy to make, cost me $17. Seems to work well on the scrap I playec with.
I cut a second groove to hold the end of the edge on the brace a bit better.
Edge Bender
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
www.Whiteroomcustomskis.com