Thicknessers

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
climberman
Posts: 42
Joined: Mon Aug 05, 2013 12:46 am

Thicknessers

Post by climberman »

There's a special on lower end thicknesses near me.

Is a "270 x 204mm thicknessing table with 5-120mm adjustable height" gunna do it for skis?

I'm wondering if folks get the full width out of one, or if a 270mm width is not going to do two sticks wide at once (up to 135mm...)

Any practical advice would be great.

Basic mocking and insults also appreciated and dealt with comfortably :)
Post Reply