Document your personal work here. Show photos, movies, and share your secrets.
Moderators: Head Monkey , kelvin , bigKam , skidesmond , chrismp
motoman
Posts: 243 Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine
Post
by motoman » Mon Mar 07, 2016 10:39 am
Akiwi
Posts: 370 Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany
Post
by Akiwi » Mon Mar 07, 2016 11:25 pm
You guys have come a long way in the last few months.. the results look very good. I like the graphics too.
Well done..
Now let's start working on your photography skills
I am nobody. Nobody's perfect, so I must be perfect.
motoman
Posts: 243 Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine
Post
by motoman » Mon Mar 07, 2016 11:51 pm
have just one lamp in my hostel and action cam with no flash, so the quality is definitely is going to be better))
motoman
Posts: 243 Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine
Post
by motoman » Wed Mar 09, 2016 4:32 am
Have anybody tested their skies or snowboards on destruction under the pressure?
It is interesting how many kilos one ski or one snowboard could take?
Using acquaintances in the Research University we did a few experiments to test theoretical and practical calculations.
motoman
Posts: 243 Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine
Post
by motoman » Tue Aug 09, 2016 1:47 am
Reinforcement in our rows. Summer does not pass in vain
motoman
Posts: 243 Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine
Post
by motoman » Sat Aug 27, 2016 11:30 pm
This spring we did an experiment to check the speed of growth of paulownia tree. It was said that rate of growth will be from 1 to 1.5 miters per season!
The result is not so impressive, but still good)
Now we are waiting for mature trees) We were told that in 5 years there will be able to cut them to use.
motoman
Posts: 243 Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine
Post
by motoman » Sun Feb 12, 2017 1:56 am
Here are some of our veneer topsheet boards.
They are not still varnished and a bit dirt.
Akiwi
Posts: 370 Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany
Post
by Akiwi » Mon Feb 13, 2017 1:41 am
Realy realy nice looking boards guys!
Congratulations..
I assume you have to drill the binding holes too.
I am nobody. Nobody's perfect, so I must be perfect.
motoman
Posts: 243 Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine
Post
by motoman » Mon Feb 13, 2017 11:45 am
Akiwi wrote:
I assume you have to drill the binding holes too.
Thanks. Yeap, those boards are just cut off. I will add a few pics after lacuering with back sides as well.