Cracked veneer topsheet

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
Noshaq
Posts: 11
Joined: Fri Feb 12, 2016 9:10 am

Cracked veneer topsheet

Post by Noshaq »

Hi, my friend pull out binding. First I thought it is just cracked veneer but I just found out it is also Flax/CF layer cracked. This is paulownia core with no special reinforcement. Just extra layer of FG. It is actually only one pair I made without hardwood reinforcement under the binding. I think this must happened while ago and the moisture get in and the bindindg screws eventualy come loose at the and of season. I probably will dig deeper in to see what is te damage.
Anyone idea how to fix this?
Noshaq
Posts: 11
Joined: Fri Feb 12, 2016 9:10 am

Post by Noshaq »

will try to post picture soon...
Noshaq
Posts: 11
Joined: Fri Feb 12, 2016 9:10 am

Post by Noshaq »

Image
Last edited by Noshaq on Sun Nov 04, 2018 8:09 am, edited 1 time in total.
Lerio
Posts: 17
Joined: Mon Aug 25, 2014 11:54 am

Post by Lerio »

Noshaq wrote:Image
Pawlonia is way too soft for binding retention, I tested it on my own skin. Fiber layer cracked 'cause practically was the only thing that hold in plase the screws.
Noshaq
Posts: 11
Joined: Fri Feb 12, 2016 9:10 am

Post by Noshaq »

Pawlonia is way too soft for binding retention, I tested it on my own skin. Fiber layer cracked 'cause practically was the only thing that hold in plase the screws.
Yep, thats what I figured out. Wont do the same mistake again.[/quote]
So the question is if its possible to fix it somehow... :(
Noshaq
Posts: 11
Joined: Fri Feb 12, 2016 9:10 am

Post by Noshaq »

What Im thinking right now is to glue some inserts in (probably in all holes even the good ones on both skis) and overlay this crack with another layer of carbon. (or flax?)
Lerio
Posts: 17
Joined: Mon Aug 25, 2014 11:54 am

Post by Lerio »

Noshaq wrote:What Im thinking right now is to glue some inserts in (probably in all holes even the good ones on both skis) and overlay this crack with another layer of carbon. (or flax?)
I have drilled new holes and I put in metal inserts with epoxy. I still using it.
Post Reply