Ben_Mtl 2014... skis and CNC

Document your personal work here. Show photos, movies, and share your secrets.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

knightsofnii
Posts: 1148
Joined: Tue Jan 08, 2008 6:02 am
Location: NJ USA
Contact:

Post by knightsofnii »

dammit, all i can see is a bunch of huge minus signs!!!! :(
Doug

ben_mtl
Posts: 582
Joined: Mon Mar 31, 2008 1:47 pm
Location: Sherbrooke, Quebec
Contact:

Post by ben_mtl »

knightsofnii wrote:dammit, all i can see is a bunch of huge minus signs!!!! :(
I just updated the links to the pictures.. I've been making some cleanup/classification on my Picasa albums lately so some links in my posts might be broken.. the pics in that post should work now !
A bad day skiing is always better than a good one at work...

knightsofnii
Posts: 1148
Joined: Tue Jan 08, 2008 6:02 am
Location: NJ USA
Contact:

Post by knightsofnii »

dust collection: adjust your bit so that your dust collection brush is in contact with the workpiece surface.
you could also tape some cardboard around the dust shoe down a couple inches? i might try that.
Doug

ben_mtl
Posts: 582
Joined: Mon Mar 31, 2008 1:47 pm
Location: Sherbrooke, Quebec
Contact:

Post by ben_mtl »

Since those pictures / reports I upgraded my dust collector to a 2.5 HP.. what a difference ! The brush was already always sitting lower than the material surface + the brush strip is doubled around the DC hose on the dust shoe, no problem with that anymore, all the dust and chips are collected (well... 95% I would say !)
PU chips tend to stick to the brush material but I live with that, very fine dust is taken care of by a workshop air cleaner hanging from the ceiling. + I wear a mask with organic+dust cartridges for good measure when operating the CNC (I'm still anxious with the smell of the PU rubber when machined...)

If I get some time I'll post some other pics from this year's (very limited) production..
Ben
A bad day skiing is always better than a good one at work...

knightsofnii
Posts: 1148
Joined: Tue Jan 08, 2008 6:02 am
Location: NJ USA
Contact:

Post by knightsofnii »

very nice, i'll have some more pix very soon as well.
I've cut some cores to my liking, just cut a mold and it wasnt the best but i think it's how i tiled the parts.

I have a whole new board shape dropping momentarily so I'll have a lot of eyecandy and some sweet graphics :).
Doug

serchman
Posts: 1
Joined: Sun Jun 16, 2019 9:28 pm

Re: Ben_Mtl 2014... skis and CNC

Post by serchman »

hi,

i've been following this posts for a while, and what looks amazing for me (a part from your great job), is the CNC machine you have.
did you build it yourself? or was it following some other existing design? i would appreciate a lot a bit of help on this.

thank you

ben_mtl
Posts: 582
Joined: Mon Mar 31, 2008 1:47 pm
Location: Sherbrooke, Quebec
Contact:

Re: Ben_Mtl 2014... skis and CNC

Post by ben_mtl »

I've built it myself, design was somehow inspired from another CNC from CNCZone (Platform CNC, IIRC..) I designed all parts myself according to my needs, had them fabricated locally, and assembled this amazing adult LEGO :)
A bad day skiing is always better than a good one at work...

User avatar
chrismp
Posts: 1328
Joined: Fri Feb 13, 2009 9:00 am
Location: Vienna, Austria

Re: Ben_Mtl 2014... skis and CNC

Post by chrismp »

Looking at the pictures of your CNC again I just noticed the feet under the bed in the middle of the long axis. I guess that means that you do not have a connection between the side pieces of the gantry underneath the bed to stiffen the gantry (unlike the platform cnc). Does that cause any problems with the stiffness of the machine?

ben_mtl
Posts: 582
Joined: Mon Mar 31, 2008 1:47 pm
Location: Sherbrooke, Quebec
Contact:

Re: Ben_Mtl 2014... skis and CNC

Post by ben_mtl »

That's correct there is no connection between the 2 sides of the gantry under the table... but it's not needed since I use 2 steppers on the X axis.
Actually the fact that there is some torsional flex for the gantry is OK because I can then check/ adjust how X and Y are perpendicular every time I reference all home. Any adjustment can be fine tuned directly in Mach 3.
A bad day skiing is always better than a good one at work...

Post Reply