Hello friends!
So I'm back to ship (get it) the splitty project.
I seem to have completed some hole measurements where the pucks will attach. Should I cut out the wood and glue in new things or fill the holes with epoxy. And Re drill?
Thank you !!!
Should I cut out the wood and glue
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Re: Should I cut out the wood and glue
Kinda hard to understand what happened from your post, but I assume you drilled your insert holes in the wrong spot.
If you drilled the holes in a raw core (i.e. not already pressed into a board), then I would recommend plugging the holes with wood dowels glued in with regular wood glue (preferrably the water resistant type).
If it happened on a finished board, I would recommend filling the holes with either epoxy or epoxy filled with microballoons.
If you drilled the holes in a raw core (i.e. not already pressed into a board), then I would recommend plugging the holes with wood dowels glued in with regular wood glue (preferrably the water resistant type).
If it happened on a finished board, I would recommend filling the holes with either epoxy or epoxy filled with microballoons.