Excess Ski Building & Woodworking Supplies
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Excess Ski Building & Woodworking Supplies
I have a whole bunch of stuff to sell...Send me an email if you are interested in anything MLReed05@gmail.com
Feel free to make offers!
22oz Triax. 50" wide: Sold
Camax Inserts 12mm: .35/each
Camax Inserts 10mm: .35/each
Approx 7ft length of firehose: 10$
Approx 7ft Air bladder made of firehose: 25$ (with air fitting)
Heat blanket 12x72 ,14 amp, j type termopcouple (I will have to double check specs): $250
Heat Blanket Controller (I will supply specs on components if you are interested): Sold
Porter-Cable 1-3/4 Peak HP Fixed Base Router with Case: $95
Three Approx 6ftx 6" strips of absolutly amazing Quilted Maple veneer: $20 each
Dewalt Jig Saw w/ 1/2 dozen composite blades: $75
Large Heavy duty Jorgenson Clamps: $20 each
Irwin Quick Grips: $10 each
Square w/ level: $10
3 yards of 50" 8 oz biaxial: $15
Mixing buckets & sqeezes: $10
Edges (176mm w/ bent tips ans tails): $4 each
Feel free to make offers!
22oz Triax. 50" wide: Sold
Camax Inserts 12mm: .35/each
Camax Inserts 10mm: .35/each
Approx 7ft length of firehose: 10$
Approx 7ft Air bladder made of firehose: 25$ (with air fitting)
Heat blanket 12x72 ,14 amp, j type termopcouple (I will have to double check specs): $250
Heat Blanket Controller (I will supply specs on components if you are interested): Sold
Porter-Cable 1-3/4 Peak HP Fixed Base Router with Case: $95
Three Approx 6ftx 6" strips of absolutly amazing Quilted Maple veneer: $20 each
Dewalt Jig Saw w/ 1/2 dozen composite blades: $75
Large Heavy duty Jorgenson Clamps: $20 each
Irwin Quick Grips: $10 each
Square w/ level: $10
3 yards of 50" 8 oz biaxial: $15
Mixing buckets & sqeezes: $10
Edges (176mm w/ bent tips ans tails): $4 each
Last edited by MLReed05 on Mon Jul 02, 2007 2:56 pm, edited 7 times in total.
I forgot to mention that I am selling this un-wired for liability reason. I will include the wires and talk the buyer through the setup if needed. It works great though. I use it on my house hold circuit with no problems.iggyskier wrote:I am 99% sure I will take the controller. I sent you a PM/email.
I stopped by yesterday on my way to Maine and snagged the glass (thanks again for the deal). All of the stuff for sale looks like it's in great condition, I only wish I had more money to spend while I was there!
On a semi-related note, got my cores cut and glued up today (white ash and cherry). prifiling jig is nearly complete. Profiling and mold tommorow!
On a semi-related note, got my cores cut and glued up today (white ash and cherry). prifiling jig is nearly complete. Profiling and mold tommorow!
Prices Reduced-Ebay!
Maple Veneerhttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1
Porter Cable Routerhttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1
Dewalt Jig Sawhttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1[/b]
Bar Clampshttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1
Quick Gripshttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1
Porter Cable Routerhttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1
Dewalt Jig Sawhttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1[/b]
Bar Clampshttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1
Quick Gripshttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1
-
- Posts: 12
- Joined: Sun Feb 04, 2007 11:47 pm
- Location: Tasmania, AUSTRALIA