First Pair of Skis

Document your personal work here. Show photos, movies, and share your secrets.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
uni412
Posts: 30
Joined: Mon Sep 04, 2006 1:40 pm

First Pair of Skis

Post by uni412 » Fri Feb 08, 2008 4:46 pm

My brother and I finished our first pair about a month ago and I finally got around to putting up this post.

Specs:
-115-80-105 (without edge width included)
-maple/poplar core with maple sidewalls (13mm thick in middle and 3+mm at tip and tail)
-20oz triaxial fiberglass above and below core
-fiberglass top sheet covered in spar varnish

We have put about a combined six days on them and they are holding up great (even with use on rails). The fiberglass top sheet and maple sidewalls are very durable and only have suffered some cosmetic dings. The ski very stiff and hard to ski (even compared to race skis). We think we made the core too thick at the tips and tails because when we planed it, we made the end of our core blanks 3mm thick but forgot to account for the fact that about 6 inches of wood would be cut off of each end of the blank.

Here are some pictures:

Image

A view of the maple sidewalls coated in spar varnish:
Image

Our venturi vacuum generator, built off plans at joewoodworker.com:
Image

Coming out of the press:
Image

Our shed where we did all the building:
Image

User avatar
littleKam
Site Admin
Posts: 269
Joined: Mon Dec 13, 2004 7:43 pm
Location: SoCal

Post by littleKam » Fri Feb 08, 2008 10:40 pm

nice! how did you do the graphics?
- Kam S Leang (aka Little Kam)

plywood
Posts: 499
Joined: Fri Oct 13, 2006 2:13 am
Location: wilen, switzerland
Contact:

Post by plywood » Sat Feb 09, 2008 2:21 am

second that! looks very clean and professional

the skis look like next years volkl because of the japanese-style grafic ;)
plywood freeride industries - go ply, ride wood!

mark
Posts: 101
Joined: Sat Mar 24, 2007 5:37 am
Location: Western Mass

Post by mark » Sat Feb 09, 2008 7:37 pm

Ooooo! Pretty. :D

That's quite a "shed" you've got there.

uni412
Posts: 30
Joined: Mon Sep 04, 2006 1:40 pm

Post by uni412 » Mon Feb 11, 2008 4:02 pm

Thanks for the responses. The graphics were just a piece of fabric we thought was cool and on top of the fabric we used 3.25 oz glass as a top sheet.

mark, I guess its not really a shed. We just call it that since it was one of those pre-assembled buildings meant to be used as a storage shed. We ran electricity to it, put in insolation, redid the floors, and covered the walls in pegboard so now its a pretty nice workshop.

Post Reply