plexiglass topsheets

For discussions related to the type of materials to build skis/snowboards and where to get them.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
o2bjedi

plexiglass topsheets

Post by o2bjedi »

if i use plexi topsheets should i sand the surface to bond w/the epoxy or can i leave as is?
kelvin
Site Admin
Posts: 262
Joined: Thu Feb 03, 2005 4:56 pm
Location: Jackson Hole

Post by kelvin »

I would sand it with 60 grit, flame treating would probably discolor it or melt it. Plexiglass (acrylic) probably isn't a good material for the topsheet. It'll chip, scratch and crack pretty easily.

-kelvin
Post Reply