my first pressed board
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
my first pressed board
Its a solid ash core with a .3mm pine veneer topsheet. I put a mylar sheet on top of the veneer juiced with epoxy and pop in the press.
I did a few vacuum before and this has been my best effort so far.
S
Re: my first pressed board
looks perfect! nice work how heavy is it? (because my ash core skis are always a bit...well...heavy )
plywood freeride industries - go ply, ride wood!
http://flickr.com/photos/windego/
I did a mahogany to show off as well.
Ash sidewall detail.
Just finished a cherry veneer as well but I need to take a pic. But the mahogany is bling.
Thanks for all the great tips on the site.
Cheers
Stan
PS never weighed them.....
I did a mahogany to show off as well.
Ash sidewall detail.
Just finished a cherry veneer as well but I need to take a pic. But the mahogany is bling.
Thanks for all the great tips on the site.
Cheers
Stan
PS never weighed them.....