FS - 6" VDS, Wood Veneer, White PBT topsheets
Posted: Fri Aug 29, 2008 8:48 pm
Here are the materials I have left from my previous run.
6" of Natural Colored VDS. I believe I have a bit over 30 meters of it. - $100
6" Wide White PBT. here is the break down of what I have lengths wise as everything has been pretrimmed for certain lengths.
6 sections 82" long
3 sections about 60-62" long
I wanna say maybe $30 + shipping for all of it (basically $5/m for 12" wide white PBT).
I also have a bunch of wood veneer. When it comes out it looks like this:
to give you an idea. I have the following:
2 Pieces 6.5" x 78" long
9 pieces 6.5" x 110" long
It is about 29 meters of wood veneer, so I was going to say $3.33/meter and say $100 + shipping.
email me at skiups9 AT gmailDOTcom.
I will also have probably 10+router bits that are good for making skis if anyone is interested too. Some for sidewalls (dovetails I altered to allow for the use of a router table) and then some flush trim bits, chamfer bits, rabbiting bits, etc. let me know and I can get a list.
6" of Natural Colored VDS. I believe I have a bit over 30 meters of it. - $100
6" Wide White PBT. here is the break down of what I have lengths wise as everything has been pretrimmed for certain lengths.
6 sections 82" long
3 sections about 60-62" long
I wanna say maybe $30 + shipping for all of it (basically $5/m for 12" wide white PBT).
I also have a bunch of wood veneer. When it comes out it looks like this:
to give you an idea. I have the following:
2 Pieces 6.5" x 78" long
9 pieces 6.5" x 110" long
It is about 29 meters of wood veneer, so I was going to say $3.33/meter and say $100 + shipping.
email me at skiups9 AT gmailDOTcom.
I will also have probably 10+router bits that are good for making skis if anyone is interested too. Some for sidewalls (dovetails I altered to allow for the use of a router table) and then some flush trim bits, chamfer bits, rabbiting bits, etc. let me know and I can get a list.