Forum Index

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Material Vendors
Goto page 1, 2  Next
 
Post new topic   Reply to topic     Forum Index -> Materials and Supplies
View previous topic :: View next topic  
Author Message
lanebobane



Joined: 19 Mar 2009
Posts: 3

PostPosted: Thu Mar 19, 2009 9:44 pm    Post subject: Material Vendors Reply with quote

Hey guys,

I'm looking to try and make my first pair of skis, but I'm not sure where to get some of the materials: edges and base material. Any suggestions? Also, is there a specific type of wood you usually get apart from various species of tree?

Thanks,
Lanebobane
Back to top
View user's profile Send private message
bigKam
Site Admin


Joined: 01 Feb 2005
Posts: 540
Location: Reno, kNevada

PostPosted: Thu Mar 19, 2009 10:30 pm    Post subject: Reply with quote

Lanebobane:

Depending on where you live, you can try www.snowboardmaterials.com
We also sell a few items in our store:
http://www.skibuilders.com/store/

There are a few other vendors overseas, but I forget their www.
For edges, you can contact CDW direct. Search this forum for the contact info. Bases come from Crown Plastics, but it's best to get a large order as it's not easy to order a few meters. Fiber glass -- look online. Epoxy -- contact QCM. Wood -- use whatever works for you. I like to recycle so I've been using things I find laying around.

Good luck and we look forward to seeing your skis.
_________________
kam k leang (aka Big Kam) www.skilab.com (The Ski Lab is not affiliated with SkiBuilders.com)
Back to top
View user's profile Send private message Visit poster's website
Mongo



Joined: 07 Jun 2006
Posts: 60
Location: Wedell Skis Lab

PostPosted: Fri Feb 05, 2010 10:03 pm    Post subject: Ski/Snowboard Building Supplier Information Reply with quote

Similar to other ski/snowboard forums with a recommended shop list, I am going to throw out where I have gotten my materials from with the appropriate contact information and a little review of each merchant. Hopefully we can get a really comprehensive list of reviews together so a new builder can get involved without a ton of bad experiences.

With that being said, I only wish that the Skibuilders.com store had been active when I started building. Thank you so much for this website and continuing to evolve everything for the builder benefit.

All of my sources are US domestic, hopefully some international builders will post up their suppliers.

Base/Topsheet/Tip and Tail Spacer/Sidewall Material

Crown Plastics
www.crownplastics.com
116 May Drive
Harrison, Ohio 45030
Phone: (513) 367-0238 1-800-368-0238
Fax: (513) 367-4004

I have always had a good experience when dealing with Crown. I typically call them up and have them e-mail me a list of the manufacturing overrun material and can buy, at least the base material, at a significant discount. They were also fine with smaller orders from the overrun material when I first started building. They also offer graphics sublimation services, but I have never used them for it so I have no experience with the process. My material has always been at my door within 1-3 weeks, and they will process a card over the phone.

Edge/VDS Material

C.D. Walzholz
www.cdw.de
5221 West 164th Street
Cleveland, Ohio 44142
Phone: (216) 267-5500
Fax: (216) 267-5533

Call them up and talk to them before you order anything to make absolutely sure that they have what you are looking for. They offer edge bending services, but I have always bent edges myself so have no real experience with everything that service entails. Make sure that you get a price quote e-mailed to you also. My last large order of VDS from them came out significantly more expensive than what they told me, but I did not have a hard copy of the quote to back me up. Also, the last time I ordered from them they were still on a C.O.D. system, and would not process a card over the phone. To place a final order I had to send an e-mail with what I wanted to Mark from CDW. Shipping has been very hit or miss. I ordered 80 edges and it showed up in 5 weeks, I ordered 200 edges and it showed up in a little more than 3 weeks.

On a side note, where has everyone been getting their VDS from nowadays? I am very interested in sourcing a new supplier for rubber after my last CDW price hike experience. Where is the tan VDS coming from, and is it a natural gum rubber? All I have ever seen is black.

Composites

Raka
www.raka.com
3490 Oleander Ave.
Ft. Pierce, Florida 34982
Phone: (772) 489-4070
Fax: (772) 461-2070

Raka supplies a wide variety on composites, epoxies, and accessories. I have always received a quality product from them with very fast shipping and very reasonable prices. They process cards over the phone and Larry is nice and helpful. Small orders are processed as quickly as big orders.

Vectorply
www.vectorply.com
3500 Lakewood Dr.
Phenix City, AL 36867
Phone: (800) 577-4521 or (334) 291-7704
Fax: (334) 291-7743

A high quality product and good people to work with over the phone. Shipping was fast. They have specific sales reps based on your region that they will put you in contact with if you call their main office.

Epoxy

QCM Industrial
www.qcminds.com
930 Central Ave South
Kent, WA 98032
Phone: (800) 321-0170 or (253) 859-0933
Fax: (253) 859-0935

Extremely helpful technical team that will steer you in the right direction based on your particular manufacturing setup. Many different resin/hardener blends to put together. Make sure you talk with them about how you are pressing so you get the resin/hardener blend that will work best for you. Several people have seemed to have issue with some of the higher viscosity resins that they have received. They will process a card over the phone and my shipping has been fast.

West System

I am leaving out the contact info because you can usually find West System epoxy locally. It worked really well for me when I was cold curing, albeit the price was a bit high relative to other resin/hardener systems out there.

Core/Sidewall Material

Renneberg Hardwoods
www.renneberghardwoods.com
Midwest and Montana

I log my white ash myself, but I get my yellow poplar from Renneberg. I know core material is usually sourced locally, but with their distribution points it seemed appropriate to list it. I have always gotten a high quality product at a reasonable price with excellent customer service. When I have told them about what I am using the wood for, they have been pretty excited about it and let me come in and select the cuts I want even for bulk orders.

Wood Veneer

Certainly Wood
www.certainlywood.com
13000 Route 78
East Aurora, New York 14052
Phone: (716) 655-0206
Fax: (716) 655-3446

Extensive selection of veneer, great sales and specials section, fast shipping and in my opinion excellent prices. The veneer search function is great and can help you initially narrow down the look you are going for. Call to place an order and make sure you talk to them about the specific material sizes of the pieces you are interested in if you are looking to minimize waste.

Tuning Equipment

Sun Valley Ski Tools
www.svst.com
2033 S Century Way
Boise, ID 83709
Phone: (800) 758-8857 or (208) 378-4300
Fax: (208) 378-1799

Anything you need from basic ski tuning supplies to production finishing machines. Very helpful staff.

CNC Equipment

ShopBot Tools Inc
www.shopbottools.com
3333 Industrial Dr
Durham, NC 27704 USA
Phone: (919) 680-4800 or (888) 680-4466
Fax: (919) 680-4900

As Ferris Bueller once said, "It is so choice. If you have the means, I highly recommend picking one up." I know a lot of you out there have had great success in building you own CNC and I wish I could have done the same, but for the rest of us there is this solution. I bought mine in the summer of 2008 and absolutely love it. Again, it is not practical for everyone, but for me it was the best way to never have to worry about using one bay of my garage ever again. The staff is extremely helpful and the communication from ordering to having the street in front of my house blocked off by a 53' trailer was superb.


Well, these are the basic people I buy from. Hopefully we can expand this list with other specific local suppliers to fill in the holes and expand the community. Any specific questions, holler.
Back to top
View user's profile Send private message
LifeisRiding



Joined: 26 Sep 2009
Posts: 80
Location: British Columbia

PostPosted: Sat Feb 06, 2010 5:50 pm    Post subject: Reply with quote

awesome information , thankyou!
Back to top
View user's profile Send private message
shopvac



Joined: 12 Oct 2008
Posts: 159
Location: Colorado

PostPosted: Tue Feb 16, 2010 8:24 pm    Post subject: Reply with quote

Mongo, great post. Any news on the VDS? I have looked at McMaster and even tried to order something I thought was going to work, but it didn't. Still searching here ...
Back to top
View user's profile Send private message
MadMarkuss



Joined: 03 Apr 2007
Posts: 4
Location: Yes

PostPosted: Thu Aug 26, 2010 3:55 pm    Post subject: Many thanks Mongo Reply with quote

I've searched high and low for 45/45 carbon and finally know where to get smaller quantities thanks to the Raka lead.
_________________
Let's just make one more run and stop in the trees on the way down. Markuss was lost when he lost his email account and PW 4 dis 4um. Now he is Mad.
Back to top
View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger
MontuckyMadman



Joined: 20 Jun 2008
Posts: 2348

PostPosted: Mon Oct 17, 2011 3:37 pm    Post subject: Reply with quote

Being as though QCM is no more Forest Paints now carries their formulations
http://forrestpaint.com/

Don't forget the most sustainable and lowest impact and lowest toxicity is Entropy.
http://www.entropyresins.com/
_________________
sammer wrote:

I'm still a tang on top guy.
Back to top
View user's profile Send private message
deepskis



Joined: 21 Sep 2011
Posts: 245
Location: Sweden (Gothenburg)

PostPosted: Sun Oct 30, 2011 1:37 pm    Post subject: Vds Reply with quote

I am looking to find a good supplier in Europe for vds rubber. Does anybody know what company to contact?
_________________
Every turn is a sign of fear

www.deepskis.com
Back to top
View user's profile Send private message Visit poster's website
SmaDa



Joined: 13 Nov 2011
Posts: 3

PostPosted: Mon Nov 14, 2011 12:42 am    Post subject: Reply with quote

Hello,

i'm looking to build my first snowboard, and i am looking for suppliers in Europe. Deepskis, can i order some things on you're website? I'm from Belgium!
Back to top
View user's profile Send private message
chrismp



Joined: 13 Feb 2009
Posts: 1254
Location: Vienna, Austria

PostPosted: Mon Nov 14, 2011 2:04 am    Post subject: Reply with quote

http://www.bmb-ski.nl/

this definitely needs to be on here!
Back to top
View user's profile Send private message
MontuckyMadman



Joined: 20 Jun 2008
Posts: 2348

PostPosted: Wed Dec 07, 2011 11:31 am    Post subject: Reply with quote

holy shit another edge manufacturer.
http://www.metalldeutsch.com/en_index1.htm
_________________
sammer wrote:

I'm still a tang on top guy.
Back to top
View user's profile Send private message
OAC



Joined: 23 Jul 2009
Posts: 945
Location: Sweden

PostPosted: Wed Dec 07, 2011 11:35 am    Post subject: Reply with quote

You must be totally super-extreme-extra blind!! It has been on the links page all the time!
Very Happy Very Happy Very Happy
_________________
On the hunt for the perfect turn....
Skype: perjan01
Back to top
View user's profile Send private message Visit poster's website
Head Monkey



Joined: 17 Jul 2005
Posts: 239
Location: Carnation, WA

PostPosted: Wed Dec 07, 2011 6:28 pm    Post subject: Reply with quote

The original edge manufacturer in fact Wink
_________________
Everything I know about snowboard building: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
Back to top
View user's profile Send private message Visit poster's website
fpcguru



Joined: 15 Dec 2011
Posts: 2

PostPosted: Thu Dec 15, 2011 11:58 am    Post subject: Regarding your wiki Reply with quote

Head Monkey wrote:
The original edge manufacturer in fact Wink


Just read through your wiki post. It's fantastic! However I did want to mention that though QCM is no longer manufacturing epoxies, Forrest Paint is working very hard to get all of them into production to help the transition be as smooth as possible for you guys.

I am the current contact for these products, and have been doing my best to learn the products and the different capabilities. If you have any questions about the products and their availability, feel free to call us anytime, or email me.

Any input you have as to service or products that could be improved would be welcome also.

We do not currently have any info on our website, but there is a blog coming soon. I hope this helps with your disappointment with QCM no longer manufacturing.

I am also looking forward to results from any other products you test as a replacement so I can learn more about the industry.

Cheers!
Back to top
View user's profile Send private message
Brazen



Joined: 25 Nov 2010
Posts: 840
Location: San Bernardino, CA

PostPosted: Tue Jan 24, 2012 8:38 pm    Post subject: Reply with quote

http://monsonboards.com/shop-materials

VDS, cores, fiberglass, base material, printing. Great guys.
_________________
"86% of the time it works 100% of the time".
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Materials and Supplies All times are GMT - 8 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group