Page 1 of 1
Fontaine ski tuning equipment
Posted: Thu Aug 06, 2009 1:33 pm
by rockaukum
I have the oportuinty to pick up two pieces of Fontaine equipment. One is the wax machine modle #304. the other is the edger, model # 2513. The only problem is I don't know about this manufacturer. Anyone here Know about them? I would like to fine if they are reliable, and if parts and supplies are available too?
Any help would be great!
Thanks much,
rockaukum
Posted: Sat Aug 08, 2009 9:39 pm
by kelvin
We have a Fontaine hot waxer. I think you can still by belts from Wintersteiger or Sun Valley ski tools. They may also have stones for the edger as well. I haven't used it much, but it looks to be well built and most of the parts look to be 'off-the-shelf' industrial parts.
If you or anyone else, has a manual for the waxer, I'd like to get a copy.
-kelvin
Posted: Sun Aug 09, 2009 10:30 am
by rockaukum
Kelvin,
I am still searching for news about these. I have talked with a guy who does repair on these and said he may be able to get a manual. Parts and pieces are still available (as well as consumables) through SVST. When I get the information, I will pass along what I can.
Thans for the help,
ra
Posted: Sun Aug 09, 2009 8:09 pm
by Head Monkey
I have a Fontaine base grinder, model 1404. Fontaine is (was?) a US manufacturer that, for a while, made machines over here for Wintersteiger. My machine was actually sold by Wintersteiger as model SNB 55. The manual that I have suggests the following address for the manufacturer: 200 27th St. Sacramento, CA 95826, phone number 916 443 3789. When I got the machine a few years ago… can’t remember exactly when, maybe 2005 or so? Anyway, at that time I got in contact with them. The manufacturer was still there, and I actually bought a part for the machine from them. The contact I had there was Dean Fothergill (sp?).
I hope that helps you.
Good luck,
Mike
Posted: Mon Aug 10, 2009 6:03 am
by rockaukum
Hey Mike,
Thanks for the reply. I found the original business in Sacramento. Fontaine ski tuning machines. However that portion of the business was sold from what I have read. Once I saw that, I never tried to contact them. After hearing from you and your fairly recent contact with them, I may try that route also. In my searching I was told that fontaine had also done work for other manufacturers too. Interesting how things work.
Thanks for the information,
ra