CNC bottom templates for sale

For non-commerical sales of materials, equipment, and resources related to ski/snowboard building

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
erlabs
Posts: 17
Joined: Thu Jun 07, 2007 11:58 am

CNC bottom templates for sale

Post by erlabs »

CNC cut bottom templates for sale. Sizes are for twin tips in 190cm, 183cm, and 176cm with 5mm of camber. The 190 and 176 molds have been used only a few times while the 183 is brand new. These molds were designed too short for our cap molds and it was cheaper to change the bottom templates then cut new cap molds.

For me one of the hardest parts in ski building is to get good edge to edge flatness in your skis. If you add a thin piece of aluminum above these molds, they will produce great flatness edge to edge.

Selling each for $200 or all three for $500. Can send CAD drawings upon request. Located in San Francsico/Bay Area and will deliver free within 50 miles. Otherwise buyer to pay freight costs.

I think its a good deal...hope you do as well.

Image
By erlabs, shot with NIKON D90 at 2009-09-16

Image
By erlabs, shot with NIKON D90 at 2009-09-16

Image
By erlabs, shot with NIKON D90 at 2009-09-16
Top
Post Reply

Return to “Yard Sale (non commercial)”