Material for 2 pairs, plus some other stuff

[krp8128]

I placed an order through ski builders last week, and this week found out I no longer have a place to work on skis. I can;t drop the prices that much lower compared to the SB Store, but I can save on shipping for anyone on the east coast.

here is what I have from the order:

• 26 10mm M5 Binding Inserts
  4 4001-grade black p-tex base material
  8 Edges -- sand blasted (1.33 mm step), 80" long
  16 Rubber foil (VDS, price per meter)
  2 Tip/Tail Spacer Material (P-tex), black, 12" x 12" x 2 mm

Some other stuff, that I can give good prices on:

• About half of a West Sytems 105/205 B size (.98g resin and .86 qt hardener) kit w/ pumps. Current price for full cans is $120w/o the pumps, i will double check what is left if there is any interest-$60 (local only)
  
  22oz Triax Glass, 50" wide. I need to see how much I have left, but it will be $25/meter full width or $12/meter half width (25 in)
  
  3 yds of 2" 5.2oz carbon tape-$17
  
  Tube Bender converted to Edge bender-$10

I also have some 0/90 carbon cloth, but I need to check on what the weight was and what I paid for it. Anything purchased locally will likely come with some extras, i.e mold release, acetone or anything else I find kicking around while getting out your stuff. Everything is in Rochester NY at the moment.

[krp8128]

Carbon Fiber, 3k 2x2 Twill cloth 5.7 oz, cut to 25" wide-$20/meter


I will ship everything but the epoxy. Make offers (comparable to SB pricing) on the first list.

[krp8128]

Bump


Lots of stuff there to get started with....

[Skwal]

Lots of stuff there to get started with....

Interested .... PM sent