Ski core Manufacturer Vashon Island

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
User avatar
skibum
Posts: 54
Joined: Wed Jan 27, 2010 8:04 am

Ski core Manufacturer Vashon Island

Post by skibum »

Just wondering if anyone knows how to contact the ski/snowboard core manufacturer on Vashon Island. It used to supply the K2 factory there and apparently is still in operation. I know Prior uses them for their cores.
If you know anything about them that would help a lot!
thanks
ben_mtl
Posts: 583
Joined: Mon Mar 31, 2008 1:47 pm
Location: Sherbrooke, Quebec
Contact:

Post by ben_mtl »

I'm not sure but I believe PMGear sources his cores from there too... (I read something about that on TGR a few days ago)
Pat might be able to help you with that.
A bad day skiing is always better than a good one at work...
User avatar
skibum
Posts: 54
Joined: Wed Jan 27, 2010 8:04 am

Post by skibum »

Sorry I realize I posted this in the wrong area but do not know how to move it. Thanks for the info. I'll follow that up.
kelvin
Site Admin
Posts: 262
Joined: Thu Feb 03, 2005 4:56 pm
Location: Jackson Hole

Post by kelvin »

His name is Steve. Nice guy.

Here is his info:

Snowboard Parts
Steve Ellison
PO Box 2606
Vashon, WA 98070
206 391 0313
User avatar
skibum
Posts: 54
Joined: Wed Jan 27, 2010 8:04 am

Post by skibum »

Great thanks for the help I'll give him a call.
Post Reply