Ski Builders Forum

http://rockies.craigslist.org/spo/3687834222.html

I think this is a 150mm belt sander. probably 3 phase


http://bellingham.craigslist.org/tls/3713108321.html

The stone is 127mm but can be converted by svst for about 1500, I would guess the belt is 150mm but not sure. this stuff is single phase.




I am looking for a shop ptex welder in particular a wintersteiger polyman, or skid, or montana, or reichmann. Theres a couple out there right now but they are asking a fortune. If anyone sees/knows of one let me know.

Have you used one of the big repair tools? I always hated the Wintersteiger ones. Heavy, frequently clogging, slow, and more difficult to control the amount of material put down. We had a couple of them that ended up in the garbage.

I am way faster with the smaller stick type pistols, even if I have to do the whole ski.

ya pretty familiar with those welders, the wintersteiger is the less reliable one that's fer sure. The montana monty is the king - best i've ever used.

ski menders do good jobs but they have issues as well. i know a lot of techs that prefer them over the shop welders.

on another note - up in vancouver canada someone scored an st-600 for $200 - dang! all it needed was a new start switch apparently.

Here's a Polyman gun on ebay. This isn't mine, I just happened to see it. It's not cheap, but it's at least half the price of a new one.

http://www.ebay.com/itm/Wintersteiger-P ... SS:US:3160

^^ thanks.

good ole fontaine jus pop up - I have one of these - great little single phase dual voltage machine

http://cosprings.craigslist.org/tls/3853305914.html

another just listed good one -

http://www.ebay.com/itm/MOHN-Ski-Mainte ... 3cd2da9cb0

This one in Colorado - $185

http://denver.craigslist.org/cbd/4014192206.html


I'm still looking for a used commercial grade ptex gun - want to spend $500 at the most

not exactly cheap, but it does have a feed wheel (which is not necessary, but is good for consistency)

http://sfbay.craigslist.org/eby/spo/4124496250.html

This one just popped up. Says its a single phase unit. It looks like an Allstone to me. Located in Alberta, I'd pay around 500 for it. The asking price of 900 is somewhat reasonable though.

http://edmonton.kijiji.ca/c-buy-and-sel ... Z533895421

another fontaine ski sander with autofeed

$400

http://sfbay.craigslist.org/pen/spo/4169458566.html

chenzo wrote:another fontaine ski sander with autofeed

$400

http://sfbay.craigslist.org/pen/spo/4169458566.html

it say in description they can place on the pallet for shipping with freight company. 110v compared to three phase 220 I got a couple hundred only in phase converter on top of the purchase price......

they are rare here on the East Coast

That machine is dual voltage - single phase 110 or 220.

LTL shipping is inexpensive these days. I shipped a 700 lbs machine from cali to toronto canada for $600 - that's over 2000 miles

free quotes - no commitment
www.uship.com

Re-post from other sub forum

Free press and misc

have at er boys!

http://southjersey.craigslist.org/zip/4131415494.html

Portland - posted by wife, no pics. phone only $250 snowboard grinder ??


http://portland.craigslist.org/clc/spo/4181280597.html