Great news, snocad related!!!!!

vinman · Post by **vinman** » Thu Apr 11, 2013 3:00 pm

I messaged Dan Graf yesterday to ask about hosting Snocad on another website. I just heard from him, he said he would upload snocad to another website if we could let him know where. Turns out all we had to do was ask....huh, go figure.

I've contacted Kam about putting it up on ski builders main web site. I figured that would be the most appropriate place to host it since we all have gotten our start here.

I'll post here when I hear back from Kam.

Dtrain · Post by **Dtrain** » Thu Apr 11, 2013 7:07 pm

It's all coming together. Good thinking

vinman · Post by **vinman** » Thu Apr 11, 2013 11:30 pm

I've been in contact with Kam, things look good, stay tuned!!!

tufty · Post by **tufty** » Fri Apr 12, 2013 1:14 am

Excellent news. Truly excellent.

chrismp · Post by **chrismp** » Fri Apr 12, 2013 3:33 am

although i've switched to rhino a while ago, this is great news!

vinman · Post by **vinman** » Fri Apr 12, 2013 4:15 am

I'm juggling time zones right now communicating between Europe, the east coast of the US and western US. Waiting for it to be a decent hour in Nevada before calling Kam.

vinman · Post by **vinman** » Fri Apr 12, 2013 7:08 am

Just talked to Kam, the wheels are in motion.

Y · Post by Y » Thu Apr 18, 2013 3:30 am

any news ?
I guess my addiction is getting badly serious !

also, big thanks !

vinman · Post by **vinman** » Thu Apr 18, 2013 8:55 am

We've been in touch with Dan, just waiting for him to get back to us. I'll post whenever I have info to share.

tufty · Post by **tufty** » Thu Apr 18, 2013 9:55 am

<f5> <f5> <f5> is it there yet? <f5> <f5> <f5> etc etc

gketcham · Post by **gketcham** » Fri Apr 19, 2013 11:48 am

Is there any other program that is even close to being as easy as SnoCad?

ProbsMagobs · Post by **ProbsMagobs** » Thu May 02, 2013 6:13 pm

any progress? Snocad is officially broken for me which sucks because I found out I can do my cncing at school but only have until summer before we get let out. Got about 4 shapes stuck as snocad files right now

vinman · Post by **vinman** » Thu May 02, 2013 6:34 pm

unfortunately I've not heard anything back from Dan in quite some time now after a few emails. Doesn't look good.

Y · Post by Y » Fri May 03, 2013 5:30 am

I guess we'll have to learn how to use a real cad then ...

is there any way to "read" snocad files ? I just need to read somes measures, for a board, and I don't want to "rethink" everything

thanks anyway

sammer · Post by **sammer** » Fri May 03, 2013 10:25 am

Y wrote:I guess we'll have to learn how to use a real cad then ...

is there any way to "read" snocad files ? I just need to read somes measures, for a board, and I don't want to "rethink" everything

thanks anyway

Nope...
Unless you saved a design spec pdf. That will give you a small drawing of the ski, core and all relevant dimensions.
All your drawings were on Dans computer and you just have a link to them.

sam

Ski Builders Forum

Ski Builders Forum

Great news, snocad related!!!!!

Great news, snocad related!!!!!