Fontaine 680 w/ auto-feed manual?
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Fontaine 680 w/ auto-feed manual?
Need a manual for a Fontaine 680. I have put in new bearings, hoses and pump. But the auto-feed had been removed and they just cut the wires out and I want to wire it back in the right way. I have already called winterstieger and Sun Valley Ski tools with no luck so far. Any help would be appreciated
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
I have the same machine. Very easy to wire.
The original feed motor is a baldor dual voltage. You can check what voltage it is wired for by using the wiring diagrams on the plate.
What does your start switch look like?
If I was there I could teach you how to wire it in about 10 minutes.
hit me at - no spaces - rob vanyi @ hotmail . com
The original feed motor is a baldor dual voltage. You can check what voltage it is wired for by using the wiring diagrams on the plate.
What does your start switch look like?
If I was there I could teach you how to wire it in about 10 minutes.
hit me at - no spaces - rob vanyi @ hotmail . com