Wooden side loader press
Posted: Sat Dec 14, 2013 12:58 pm
I beams are way too expensive in ak and we'd rather work with wood than steel so here it is.
Beams are 20" wide laminated alternating 2x12s and plywood. Notched 8x8 timber supports reinforced with 3/4 inch allthread from every direction. Homeade heat blankets a la skibuilders. Length adjustable top and bottom molds. Topless babes of hawaii calendar slightly obscured by glare in the photo (sorry).
About 15 successful pairs pressed so far. Top beam deflects 1/8 of an inch at 50 psi but for some reason the bottom beam stays true. I'll get around to posting construction photos sometime in the future. Happy to answer any questions.
Beams are 20" wide laminated alternating 2x12s and plywood. Notched 8x8 timber supports reinforced with 3/4 inch allthread from every direction. Homeade heat blankets a la skibuilders. Length adjustable top and bottom molds. Topless babes of hawaii calendar slightly obscured by glare in the photo (sorry).
About 15 successful pairs pressed so far. Top beam deflects 1/8 of an inch at 50 psi but for some reason the bottom beam stays true. I'll get around to posting construction photos sometime in the future. Happy to answer any questions.