longboard custom handmade

Yak away here, please! This category is for random discussions, comments, and anything but the topics shown above.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

longboard custom handmade

Post by ilyha »

hello friend what about longboards?
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

i made for me and my friends good longs
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

tomorrow i show some pictures
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

hello friends
sometime ago i buy some materials for made snowboard but i made som longs
all my deck have concave like this
Image

my 1st real deck
Image
Image

wery stiff

next carbon
Image base 30" not stiff, good for girls
next i made for my sellf
many wood many strong fiber glass
this is the best for me
for pump,dowmhill or citytrail
Image
Image
Image
Image

next drop for my friend
Image

Image

Image
the last what i made
fiberglass carbonfiber and some wood veneer
was not hard for 95 kg
but wery light for this
Image
Image
Image
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

i think sometimes i will made snowboards , but now only long
User avatar
LifeisRiding
Posts: 80
Joined: Sat Sep 26, 2009 7:21 pm
Location: British Columbia

Post by LifeisRiding »

Those are some nice looking Longboards!

I build longboards too, but just maple veneers no fiberglass.

I like the built in riser pads. What kind of press are you using?
Top and Bottom moulds to get those shapes?
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

hi
I work at the woodworking factory . we have a membrane hydro press. I did a matrix form and use it to obtain this shape. external contours I cut on a CNC.
its my hobby ))
MadRussian
Posts: 712
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Post by MadRussian »

ilyha wrote:hi
I work at the woodworking factory . we have a membrane hydro press. I did a matrix form and use it to obtain this shape. external contours I cut on a CNC.
its my hobby ))
krasivo boards polychilis' xoroshaya pabota dlya takovo hobby. V sibiri nado delat' skis/snowboard toje

dobro pojalovat' k nam
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

spasibo tovarish )))
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

Hello
here my new drop platform board
Image
Image

drop 25 мм
long 40"
wheelbase 30"-31,8"

very stiff

truck Bear 52 in front / Bear 40 in rear
wheels Seismic Blast wave 78 mm
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

ilyha wrote:Hello
here my new drop platform board
Image
Image

top and bottom Zebrano wood veneer
drop 25 мм
long 40"
wheelbase 30"-31,8"

very stiff

truck Bear 52 in front / Bear 40 in rear
wheels Seismic Blast wave 78 mm
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

Image
Image
this topmount for friend must be RED but too much metallick in lack and long makin pink ))))))
ilyha
Posts: 12
Joined: Sun Oct 14, 2012 10:35 pm
Location: Russia, Siberia

Post by ilyha »

Image
Image

Hello friends!
some last summer fotos ))
Post Reply