FS: I-Beam Press and Materials, Adelaide $5000
Posted: Fri Apr 18, 2014 6:40 pm
UPDATE: Now For Sale in Adelaide!
My press build is here and is based on the Happy Monkey build:
viewtopic.php?t=2399
Since the photos it has been upgraded and now runs 2 ramp/soak controllers.
I've also got a bunch of materials. 2 or 3 machines cores. A couple core blanks. VDS. Unidirectional carbon (150m or so of 1" thick stuff). Black base material. Edges for say 8 boards. A fair few board sets worth of inserts. Some silky oak veneer if you're interested in that.
It's all located in Adelaide, SA and would need to be picked up. I'm looking for around $5,000 for the lot, can provide more details if anyone is genuinely interested.
Reply here, via email a dot blackburn at live dot com dot au or give me a ring on: zero four zero three one eight three one two one.
My press build is here and is based on the Happy Monkey build:
viewtopic.php?t=2399
Since the photos it has been upgraded and now runs 2 ramp/soak controllers.
I've also got a bunch of materials. 2 or 3 machines cores. A couple core blanks. VDS. Unidirectional carbon (150m or so of 1" thick stuff). Black base material. Edges for say 8 boards. A fair few board sets worth of inserts. Some silky oak veneer if you're interested in that.
It's all located in Adelaide, SA and would need to be picked up. I'm looking for around $5,000 for the lot, can provide more details if anyone is genuinely interested.
Reply here, via email a dot blackburn at live dot com dot au or give me a ring on: zero four zero three one eight three one two one.