Page 1 of 1
New flex and design tool!
Posted: Sat Jun 14, 2014 12:24 pm
by mikic1
Hi guys,
Iv been working on this for a while and it seems to work fine now, let me know if you find problems that I should fix.
It is made as a browser tool so it works on all platforms.
You can simulate flex, weight, deflection and setup a lot of options.
http://www.junksupply.com/?page_id=1167
license key will be on the main page!
cheers
M
Posted: Sat Jun 14, 2014 12:38 pm
by loganimlach
Do we have to purchase a license key? I'm interested to compare outputs against my design spreadsheet.
Posted: Sat Jun 14, 2014 12:51 pm
by mikic1
Hi,
Use this license key, I will try to run it for free to begin with.
TN0AH-4TCVS-O8N0Z-MTDLO
Posted: Sat Jun 14, 2014 1:11 pm
by loganimlach
That's great. I've always wondered how correct my design spreadsheet was, hell I'm happy I was even in the correct order of magnitude let alone near the same results as you.
The only thing that I would recommend adding are some baselines for soft, medium, and stiff skis on your plots. That will give the user some useful information rather than just raw numbers.
Posted: Sun Jun 15, 2014 7:46 pm
by b2therye
where do you get your triaxial carbon from on that website?
Posted: Mon Jun 16, 2014 9:55 am
by MontuckyMadman
b2therye wrote:where do you get your triaxial carbon from on that website?
yeah, and what are the axis' +-45 and 0?
Is it sold by the meter? Looks like I can only get 1.
Will you ship to usa?
I thought you were dropping this buis.
Posted: Tue Jun 17, 2014 3:55 am
by SleepingAwake
calculation options for asymmetric layups would be cool, but that makes the whole thing a lot more complicated...
nice work so far! I haven't crosschecked with my own tool however...
Posted: Mon Jun 23, 2014 7:02 am
by mikic1
Yeah, I'm implementing the first few changes to give more freedom and to give an idea about the feel of the flex (soft to hard).
As for the carbon, it is 150gms in each direction, it is from Formax.
I dont have any good ways to ship to US from Europe, its so damn expensive.
Cheers
M
Posted: Mon Jun 23, 2014 2:40 pm
by b2therye
what about shipping to AU?
Posted: Tue Jun 24, 2014 11:03 am
by mikic1
same thing. Costs like 200 euros for 10kg or similar....
Posted: Tue Jun 24, 2014 11:22 am
by MontuckyMadman
FYI PE is not abs and vice versa
Posted: Sat Oct 11, 2014 1:02 am
by mikic1
Updated version ready, feedback always welcome. Key can be found on the front page. Enjoy
http://www.junksupply.com/ski-calculator/
Posted: Sat Oct 11, 2014 11:53 pm
by Head Monkey
License key invalid.
If you're interested in open sourcing this stuff, integrating it with MonkeyCAM (
https://github.com/mikemag/MonkeyCAM) would be trivial, and we could spit out the results right along with the G-Code programs and shape overviews based on a full, accurate core profile
We could also place the foot loads over the stance options (for snowboards anyway) automatically.
If you're interested but don't know Git or C++ lemme know and I can help out. Seems like you have the HTML part of it dialed!
Posted: Sun Oct 12, 2014 10:04 am
by mikic1
Should be valid now...
I really have not had time to look into the MonkeyCAM, Im sure integration is great idea on the long term. Atm I dont have too much time, perhaps in the future.
I payed a freelancer to program it for me, from frelancer.com...
Posted: Sun Oct 12, 2014 12:37 pm
by skidesmond
Pretty slick.